# How do you join lines into a closed shape?

**URL:** <https://forum.lightburnsoftware.com/t/how-do-you-join-lines-into-a-closed-shape/59764>\
**Category:** LightBurn Software Questions\
**Created:** [February 10, 2022, 5:39pm UTC](https://forum.lightburnsoftware.com/t/how-do-you-join-lines-into-a-closed-shape/59764 "2022-02-10T17:39:43Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![berainlb](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/85f322/32.png) [@berainlb](https://forum.lightburnsoftware.com/u/berainlb)\
**Post date:** [February 10, 2022, 10:14pm UTC](https://forum.lightburnsoftware.com/t/how-do-you-join-lines-into-a-closed-shape/59764/4 "2022-02-10T22:14:10Z")

</div>

I wrote a fairly thorough post describing how and when close path as well as close path with tolerance will work. It also covers auto-join select shapes and how it differs from close path.

Might be worth a read.

> [@Having trouble with closing shapes](https://forum.lightburnsoftware.com/t/having-trouble-with-closing-shapes/56579/5):
>
> Close shape and close shape with tolerance are 2 variations on the same core function. Close shape only works on a very specific and narrow condition where you have a nearly closed shape that’s disconnected only at one joint. Meaning that all other nodes between segments of the shape are full joined. As long as the single unjoined pair of nodes are within overlap tolerance, the “close shape” function will join the nodes and close the shape. The only fundamental difference with close shape with …

---

_[View the full topic](https://forum.lightburnsoftware.com/t/how-do-you-join-lines-into-a-closed-shape/59764)._
