# How to Engrave an Image

**URL:** <https://forum.lightburnsoftware.com/t/how-to-engrave-an-image/60322>\
**Category:** LightBurn Software Questions\
**Created:** [February 17, 2022, 1:19pm UTC](https://forum.lightburnsoftware.com/t/how-to-engrave-an-image/60322 "2022-02-17T13:19:27Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mgbotros](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/9dc877/32.png) [@mgbotros](https://forum.lightburnsoftware.com/u/mgbotros)\
**Post date:** [February 17, 2022, 1:19pm UTC](https://forum.lightburnsoftware.com/t/how-to-engrave-an-image/60322/1 "2022-02-17T13:19:27Z")

</div>

I’m using a jpeg, png, etc, type of images. Do I use image adjuster or image trace to engrave an image? Also, do I use the original image or the traced image in image adjuster? I appreciate your feedback.

Regards

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [February 17, 2022, 8:05pm UTC](https://forum.lightburnsoftware.com/t/how-to-engrave-an-image/60322/2 "2022-02-17T20:05:35Z")

</div>

This is worth review, [Image Settings - LightBurn Software Documentation](https://lightburnsoftware.github.io/NewDocs/CutSettings-Image.html#image-mode)

Adjusting your source image may help, depending on the source. [Adjust Image Tool - LightBurn Software Documentation](https://lightburnsoftware.github.io/NewDocs/AdjustImage.html)

---

<div class="post-metadata">

**Author:** ![mgbotros](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/9dc877/32.png) [@mgbotros](https://forum.lightburnsoftware.com/u/mgbotros)\
**Post date:** [February 18, 2022, 12:39pm UTC](https://forum.lightburnsoftware.com/t/how-to-engrave-an-image/60322/3 "2022-02-18T12:39:32Z")

</div>

Thank you very much Rick. I appreciate your timely reply.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [March 20, 2022, 12:40pm UTC](https://forum.lightburnsoftware.com/t/how-to-engrave-an-image/60322/4 "2022-03-20T12:40:30Z")

</div>

Closed on March 20, 2022, 12:40pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
