# I have problem with my roller

**URL:** <https://forum.lightburnsoftware.com/t/i-have-problem-with-my-roller/127991>\
**Category:** Ortur Lasers\
**Created:** [February 3, 2024, 2:09pm UTC](https://forum.lightburnsoftware.com/t/i-have-problem-with-my-roller/127991 "2024-02-03T14:09:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dejancho](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/dec6dc/32.png) [@Dejancho](https://forum.lightburnsoftware.com/u/Dejancho)\
**Post date:** [February 3, 2024, 2:09pm UTC](https://forum.lightburnsoftware.com/t/i-have-problem-with-my-roller/127991/1 "2024-02-03T14:09:38Z")

</div>

G-code motion target exceeds machine travel. Machine position safely retained. Alarm may be unlocked. (Right-click the ‘Devices’ button to reset the connection)

On or near line 8:

Stream completed in 0:00

[MSG:Reset to continue]

ok

Ortur Laser Master 2 Pro S2 Ready!

OLF:OLF 190.

OLH:OLM\_ESP\_PRO\_V1.2.

OLM:GENERAL.

[MSG:Warning: Flame Sensor Disabled by User OverRide]

[MSG:Flame detector active,Ambient infrared value:0]

Grbl 1.1f [‘$’ for help]

[MSG:‘$H’|‘$X’ to unlock]

[MSG:Caution: Unlocked]

When i turn off my roller LighhtBurn work pefrectly without alarm but when it’s on i have this issue. have tried to change $259 $260 $261 but still have alarm

Can somebody help me

---

<div class="post-metadata">

**Author:** ![berainlb](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/85f322/32.png) [@berainlb](https://forum.lightburnsoftware.com/u/berainlb)\
**Post date:** [February 3, 2024, 2:32pm UTC](https://forum.lightburnsoftware.com/t/i-have-problem-with-my-roller/127991/2 "2024-02-03T14:32:22Z")

</div>

Soft limits are typically disabled while using rotary. `$20=0` to disable. `$20=1` to re-enable.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [March 4, 2024, 2:33pm UTC](https://forum.lightburnsoftware.com/t/i-have-problem-with-my-roller/127991/3 "2024-03-04T14:33:09Z")

</div>

Closed on March 4, 2024, 2:33pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.