Image burns upside down

[Dawn1 (Dawn Guthrie)]

hi there i have finally actually burnt something onto my wood but the image is upside down, not the picture on the screen im running it directly through lightburn not transferring by gcode to grbl. any ideas please

[Dawn1 (Dawn Guthrie)]

and inverted the image to face the other way too

[Hank (Hank Morgan)]

Copy & paste your thread title into the search at the top right corner of the page.
You’ll be rewarded with dozens of threads that describe your problem and how to fix.
It comes up here about 4 times a day…

[Rick (Technical Evangelist)]

Configuring a 3018 CNC (or other CNC-based laser) for use with LightBurn

The summary: Turn on Laser Mode to get rid of the travel lines You’re trying to move too fast, which is why you don’t get enough power You need to zero the machine 3018’s are pre-configured for use as CNC machines, not lasers, so their settings and speeds will likely need to be changed to give you acceptable results with LightBurn. To see the existing settings, you can type $$ into the console in LightBurn and press enter, or go to Edit > Machine Settings. Both are showing the same values, b…