# Image incorrect position, Shapes correct

**URL:** <https://forum.lightburnsoftware.com/t/image-incorrect-position-shapes-correct/126136>\
**Category:** LightBurn Hardware Compatibility\
**Tags:** grbl, neje\
**Created:** [January 25, 2024, 7:16am UTC](https://forum.lightburnsoftware.com/t/image-incorrect-position-shapes-correct/126136 "2024-01-25T07:16:33Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![monny](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/9fc348/32.png) [@monny](https://forum.lightburnsoftware.com/u/monny)\
**Post date:** [January 25, 2024, 7:16am UTC](https://forum.lightburnsoftware.com/t/image-incorrect-position-shapes-correct/126136/1 "2024-01-25T07:16:34Z")

</div>

Hi, i am struggling to get my image in the right spot.

The Frame option (with blue laser point) shows the right position, when i draw a rectangle it is positioned correctly but the image is burnt about 5 cm too far right.

I noticed the Neonlight affects the laser and some intercerences do sometimes cause problems, but now i moved the laser away from it and it keeps being off.  
Also i checked the belt, they move freely.

Can someone help me with this ?

I have a NEJE 4 Max.

---

<div class="post-metadata">

**Author:** ![Mwce](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/8797f3/32.png) [@Mwce](https://forum.lightburnsoftware.com/u/Mwce)\
**Post date:** [January 25, 2024, 5:03pm UTC](https://forum.lightburnsoftware.com/t/image-incorrect-position-shapes-correct/126136/2 "2024-01-25T17:03:02Z")

</div>

Did you calibrate your laser lens? I had the same problem until I calibrated it.

---

<div class="post-metadata">

**Author:** ![monny](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/9fc348/32.png) [@monny](https://forum.lightburnsoftware.com/u/monny)\
**Post date:** [January 31, 2024, 12:26pm UTC](https://forum.lightburnsoftware.com/t/image-incorrect-position-shapes-correct/126136/3 "2024-01-31T12:26:59Z")

</div>

i now found the issue it really was the belt i completely uninstalled it and installed it again now it works, but my images get too light if i scale it up in lightburn, if i crop a small part of the image to try out the settings it gets really dark and if i then engrave the whole image with the same dpi speed and power it gets a lot less dark

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [March 1, 2024, 12:27pm UTC](https://forum.lightburnsoftware.com/t/image-incorrect-position-shapes-correct/126136/4 "2024-03-01T12:27:02Z")

</div>

Closed on March 1, 2024, 12:27pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
