# Increasing the DPI and encountering issues with image engraving.

**URL:** <https://forum.lightburnsoftware.com/t/increasing-the-dpi-and-encountering-issues-with-image-engraving/160125>\
**Category:** GRBL\
**Tags:** grbl, dpi, atomstack-m4-galvo, image, atomstack\
**Created:** [December 20, 2024, 2:06am UTC](https://forum.lightburnsoftware.com/t/increasing-the-dpi-and-encountering-issues-with-image-engraving/160125 "2024-12-20T02:06:43Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Theodor\_kanabi](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/theodor_kanabi/32/97412_2.png) [@Theodor\_kanabi](https://forum.lightburnsoftware.com/u/Theodor_kanabi)\
**Post date:** [December 20, 2024, 2:06am UTC](https://forum.lightburnsoftware.com/t/increasing-the-dpi-and-encountering-issues-with-image-engraving/160125/1 "2024-12-20T02:06:43Z")

</div>

Greetings everyone. I prepared an image for engraving with an Atomstack M4 machine. Everything was going well until I increased the DPI. The laser started jumping to the upper parts of the design and leaving some parts of the image blank. Also, in this situation, the operation on my screen doesn’t reach 100% and the laser stops, leaving the image incomplete. This happens starting from DPI values above 220. Unfortunately, this value is not enough for the quality of my image and the image becomes pixelated and low quality at this DPI. Is it possible for someone to guide me so that I can engrave with a higher DPI? I’ve tried different file formats and my image DPI is 300.

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/colin/32/41542_2.png) [@Colin](https://forum.lightburnsoftware.com/u/Colin)\
**Post date:** [December 20, 2024, 2:21am UTC](https://forum.lightburnsoftware.com/t/increasing-the-dpi-and-encountering-issues-with-image-engraving/160125/2 "2024-12-20T02:21:29Z")

</div>

Could you attach a copy of your .lbrn2 file so we can take a look at your setting?

Some pictures of the results you are getting would be very helpful as well.

---

<div class="post-metadata">

**Author:** ![Theodor\_kanabi](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/theodor_kanabi/32/97412_2.png) [@Theodor\_kanabi](https://forum.lightburnsoftware.com/u/Theodor_kanabi)\
**Post date:** [December 20, 2024, 10:00am UTC](https://forum.lightburnsoftware.com/t/increasing-the-dpi-and-encountering-issues-with-image-engraving/160125/3 "2024-12-20T10:00:39Z")

</div>

Hey colin  
As you can see, I have engraved on a black metal card, and you can see that it is half-finished and the operation is not completed.

[girl.lbrn2](https://forum.lightburnsoftware.com/uploads/short-url/3pZgik8gVRMbIn8XerI1zUWPVW1.lbrn2) (751.9 KB)

 ![jpgg](https://forum.lightburnsoftware.com/uploads/default/original/3X/9/5/95da6c50209f39092253d22e6219e9055cdf6001.jpeg)  
 ![sdgd](https://forum.lightburnsoftware.com/uploads/default/original/3X/4/2/422cddc5cb98da423f000cdef87e24823742c69b.jpeg)  
 ![Untitled-1](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/2/a261fd9f3ffea3eedb76f8af384941763097b5d0.jpeg)

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/colin/32/41542_2.png) [@Colin](https://forum.lightburnsoftware.com/u/Colin)\
**Post date:** [December 28, 2024, 6:58pm UTC](https://forum.lightburnsoftware.com/t/increasing-the-dpi-and-encountering-issues-with-image-engraving/160125/4 "2024-12-28T18:58:11Z")

</div>

Hi Theodor,

Does the preview complete, when you press Alt+P? I opened up your file on a ‘dummy’ Seacad device in LightBurn 1.7.03, as you have, and the file does preview completely no matter the DPI.

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/c/1/c1af76347b9446f1a61d2748fef2b09c4780b813.png)  
 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/b/3/b37443373f99199414a3f380ae92e067651ddd12.jpeg)

---

<div class="post-metadata">

**Author:** ![Theodor\_kanabi](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/theodor_kanabi/32/97412_2.png) [@Theodor\_kanabi](https://forum.lightburnsoftware.com/u/Theodor_kanabi)\
**Post date:** [December 28, 2024, 9:06pm UTC](https://forum.lightburnsoftware.com/t/increasing-the-dpi-and-encountering-issues-with-image-engraving/160125/5 "2024-12-28T21:06:38Z")

</div>

Hi Colin

yes, I’m experiencing the same thing. The file preview is displaying completely and correctly for me as well.

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/colin/32/41542_2.png) [@Colin](https://forum.lightburnsoftware.com/u/Colin)\
**Post date:** [December 29, 2024, 6:22am UTC](https://forum.lightburnsoftware.com/t/increasing-the-dpi-and-encountering-issues-with-image-engraving/160125/6 "2024-12-29T06:22:34Z")

</div>

Results like this typically point to an output issue with your physical hardware or a flaky USB connection. How are you connected to the laser? Are you using any hubs or extenders between your PC and the laser?

---

<div class="post-metadata">

**Author:** ![Theodor\_kanabi](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/theodor_kanabi/32/97412_2.png) [@Theodor\_kanabi](https://forum.lightburnsoftware.com/u/Theodor_kanabi)\
**Post date:** [December 29, 2024, 10:45am UTC](https://forum.lightburnsoftware.com/t/increasing-the-dpi-and-encountering-issues-with-image-engraving/160125/7 "2024-12-29T10:45:53Z")

</div>

I’m currently using the USB 2.0 B cable that came with my device and connecting it directly to my motherboard’s ports. Should I replace this cable with a higher-quality one? I’ve noticed that, oddly enough, this issue is resolved when I significantly reduce the design size. I can then engrave at any DPI or interval I want, but this small size is not what I’m aiming for.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [January 28, 2025, 10:46am UTC](https://forum.lightburnsoftware.com/t/increasing-the-dpi-and-encountering-issues-with-image-engraving/160125/8 "2025-01-28T10:46:43Z")

</div>

Closed on January 28, 2025, 10:46am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
