# Irregular circle, homing problem, power settings, backlash

**URL:** <https://forum.lightburnsoftware.com/t/irregular-circle-homing-problem-power-settings-backlash/106565>\
**Category:** Tips and Tricks\
**Tags:** ruida\
**Created:** [August 4, 2023, 6:04am UTC](https://forum.lightburnsoftware.com/t/irregular-circle-homing-problem-power-settings-backlash/106565 "2023-08-04T06:04:59Z")\
**Posts on this page:** 1\
**Showing post:** 35

<div class="post-metadata">

**Author:** ![NicholasL](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/nicholasl/32/40942_2.png) [@NicholasL](https://forum.lightburnsoftware.com/u/NicholasL)\
**Post date:** [August 14, 2023, 5:41am UTC](https://forum.lightburnsoftware.com/t/irregular-circle-homing-problem-power-settings-backlash/106565/35 "2023-08-14T05:41:46Z")

</div>

> [@jkwilborn](#):
>
> I have my Ruida minimum power in the configuration set to 9%, Maximum is 100%…
> 
> That would indicate at 50% power I should expect ~55% pwm rate?
> 
> My scope has the generated LPWM1 signal at 50% exactly…

Yes that is correct, should be about 55% for the PWM signal.

These are not limits but book ends for your power scale. One way to check this is to run at test at 20% in LightBurn. Now set your min/max power% in the controller from 9/100 to 9/20, and your power output will drop dramatically since the new output will be only about 12%.

---

_[View the full topic](https://forum.lightburnsoftware.com/t/irregular-circle-homing-problem-power-settings-backlash/106565)._
