# Is CSMIO/P-M board supported?

**URL:** <https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833>\
**Category:** LightBurn Hardware Compatibility\
**Created:** [March 16, 2025, 5:53pm UTC](https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833 "2025-03-16T17:53:54Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![rbr4ve](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/e274bd/32.png) [@rbr4ve](https://forum.lightburnsoftware.com/u/rbr4ve)\
**Post date:** [March 16, 2025, 5:53pm UTC](https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833/1 "2025-03-16T17:53:54Z")

</div>

Hello  
Can someone confirm compability with this board:

> **[CSMIO/IP-M - 4-axis Motion Controller | CS-LAB](https://en.cs-lab.eu/product/csmioip-m-4-axis-ethernet-motion-controller-stepdir-with-connectors/)**
>
> Our company mission is to creating reliable systems of 4 axis motion controller - CSMIO/IP-M . Highly skilled employees assure best quality of available products.

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [March 16, 2025, 6:37pm UTC](https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833/2 "2025-03-16T18:37:37Z")

</div>

> [@rbr4ve](#):
>
> confirm compability with this board

IMO, it won’t work:

> Control software (simCNC, Mach3, Mach4) changes gcodes into motion trajectory and sends it through the network connection to the CSMIO/IP-M.

LightBurn _generates_ G-Code and sends that text to the (typically GRBL-ish) controller, which interprets the commands, performs the trajectory planning, and generates the appropriate motor control signals.

The board you’re considering is apparently fed trajectory control points, not G-Code.

---

<div class="post-metadata">

**Author:** ![rbr4ve](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/e274bd/32.png) [@rbr4ve](https://forum.lightburnsoftware.com/u/rbr4ve)\
**Post date:** [March 16, 2025, 7:36pm UTC](https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833/3 "2025-03-16T19:36:44Z")

</div>

OK, so not directly suported 🙂  
but… can Lightburn generate gcode files for Mach3 software?  
I’m looking for software for cutting with “Lead In” functionality - knife is rolling and needs some space before cuting to reach correct direction (glass table cutter)

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [March 16, 2025, 7:53pm UTC](https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833/4 "2025-03-16T19:53:19Z")

</div>

> [@rbr4ve](#):
>
> software for cutting with “Lead In” functionality

Perhaps:

> **[Line Mode - LightBurn Documentation](https://docs.lightburnsoftware.com/2.0/Reference/CutSettingsEditor/LineMode/#lead-in-lead-out)**
>
> Better software for laser cutters

Keep in mind that LightBurn generates G-Code for _laser_ machines, rather than typical CNC G-Code controllers. In particular, LightBurn has weak Z-axis control and no provision for determining the toolpath beyond the optimizations useful for lasers.

From what I read around here, while it’s _possible_ to adapt LightBurn’s output for non-laser machines, the process requires fairly deep knowledge of G-Code programming and enough hackery to deter all but the most determined of users.

MillMage is intended to address general CNC machining, but is in a closed beta test. Previous discussions may be relevant:

[https://forum.lightburnsoftware.com/search?q=millmage%20order%3Alatest](https://forum.lightburnsoftware.com/search?q=millmage%20order%3Alatest)

---

<div class="post-metadata">

**Author:** ![rbr4ve](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/e274bd/32.png) [@rbr4ve](https://forum.lightburnsoftware.com/u/rbr4ve)\
**Post date:** [March 16, 2025, 8:14pm UTC](https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833/5 "2025-03-16T20:14:13Z")

</div>

I saw docs, it’s why I’m asking.  
I don’t need Z-axis control, on/off is enough.  
I want to make some tests in this case.  
Can you tell which kind of machine I should choose for Lead-In function?  
I use LightBurn for my Ruida CO2 laser, there is Lead-IN.  
Now I am at home, in demo version (no machine connected) I can’t see this options.

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [March 16, 2025, 8:23pm UTC](https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833/6 "2025-03-16T20:23:59Z")

</div>

> [@rbr4ve](#):
>
> which kind of machine I should choose for Lead-In function

If you’ve set LightBurn up with `No Machine` selected, then a whole bunch of stuff can’t / won’t work.

Set up a generic GRBL device and it’ll know what to do; the “demo” program is identical to the “real” program, minus a paid license to end the trial period.

---

<div class="post-metadata">

**Author:** ![rbr4ve](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/e274bd/32.png) [@rbr4ve](https://forum.lightburnsoftware.com/u/rbr4ve)\
**Post date:** [March 16, 2025, 8:52pm UTC](https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833/7 "2025-03-16T20:52:20Z")

</div>

Beginner Mode options… eh  
Now there is what I need 🙂 Thanks!

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [March 16, 2025, 10:00pm UTC](https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833/8 "2025-03-16T22:00:31Z")

</div>

> [@rbr4ve](#):
>
> Beginner Mode options

Yeah, you’re _so_ over that! 🧑‍🎓

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [April 15, 2025, 10:00pm UTC](https://forum.lightburnsoftware.com/t/is-csmio-p-m-board-supported/167833/9 "2025-04-15T22:00:59Z")

</div>

Closed on April 15, 2025, 10:00pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
