# Is there a way to set a timer so the laser will automatically turn off and on every 30 minutes?

**URL:** <https://forum.lightburnsoftware.com/t/is-there-a-way-to-set-a-timer-so-the-laser-will-automatically-turn-off-and-on-every-30-minutes/52248>\
**Category:** Tips and Tricks\
**Created:** [November 18, 2021, 10:15pm UTC](https://forum.lightburnsoftware.com/t/is-there-a-way-to-set-a-timer-so-the-laser-will-automatically-turn-off-and-on-every-30-minutes/52248 "2021-11-18T22:15:16Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gravedave](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/g/13edae/32.png) [@Gravedave](https://forum.lightburnsoftware.com/u/Gravedave)\
**Post date:** [November 18, 2021, 10:15pm UTC](https://forum.lightburnsoftware.com/t/is-there-a-way-to-set-a-timer-so-the-laser-will-automatically-turn-off-and-on-every-30-minutes/52248/1 "2021-11-18T22:15:16Z")

</div>

Hi guys. Still new to this and sorry if it’s in the wrong category. Title says it all. Thanks for your help

---

<div class="post-metadata">

**Author:** ![TomWS](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/tomws/32/21051_2.png) [@TomWS](https://forum.lightburnsoftware.com/u/TomWS)\
**Post date:** [November 18, 2021, 11:21pm UTC](https://forum.lightburnsoftware.com/t/is-there-a-way-to-set-a-timer-so-the-laser-will-automatically-turn-off-and-on-every-30-minutes/52248/2 "2021-11-18T23:21:29Z")

</div>

Can you explain how you would use this? “Turning On” a laser simply means applying power, generally speaking around here. It doesn’t do much at that stage until code is loaded onto it.

---

<div class="post-metadata">

**Author:** ![killrob](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/5f8ce5/32.png) [@killrob](https://forum.lightburnsoftware.com/u/killrob)\
**Post date:** [November 19, 2021, 11:48am UTC](https://forum.lightburnsoftware.com/t/is-there-a-way-to-set-a-timer-so-the-laser-will-automatically-turn-off-and-on-every-30-minutes/52248/4 "2021-11-19T11:48:59Z")

</div>

I think he’s asking cause i remember that in Lasergrbl ther is a setting that turn off laser after 30 min of work, for 5 or 10 min, to preserve module and let it cool down a little, even during a job.

---

<div class="post-metadata">

**Author:** ![TomWS](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/tomws/32/21051_2.png) [@TomWS](https://forum.lightburnsoftware.com/u/TomWS)\
**Post date:** [November 19, 2021, 2:20pm UTC](https://forum.lightburnsoftware.com/t/is-there-a-way-to-set-a-timer-so-the-laser-will-automatically-turn-off-and-on-every-30-minutes/52248/5 "2021-11-19T14:20:37Z")

</div>

> [@killrob](#):
>
> ther is a setting that turn off laser after 30 min of work, for 5 or 10 min, to preserve module and let it cool down a little, even during a job.

That is a reasonable use case, although, as far as I know, not supported in LB.

OP needs to learn that the “title doesn’t say it all”. As you know, if you have a question, ask it clearly and crisply. Don’t waste our time trying to guess what you want.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [December 19, 2021, 2:21pm UTC](https://forum.lightburnsoftware.com/t/is-there-a-way-to-set-a-timer-so-the-laser-will-automatically-turn-off-and-on-every-30-minutes/52248/6 "2021-12-19T14:21:08Z")

</div>

Closed on December 19, 2021, 2:21pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
