# Is this safe to engrave on?

**URL:** <https://forum.lightburnsoftware.com/t/is-this-safe-to-engrave-on/24456>\
**Category:** Community Laser Talk\
**Created:** [October 24, 2020, 10:17am UTC](https://forum.lightburnsoftware.com/t/is-this-safe-to-engrave-on/24456 "2020-10-24T10:17:18Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![beamer3.6](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/e480ec/32.png) [@beamer3.6](https://forum.lightburnsoftware.com/u/beamer3.6)\
**Post date:** [October 24, 2020, 10:17am UTC](https://forum.lightburnsoftware.com/t/is-this-safe-to-engrave-on/24456/1 "2020-10-24T10:17:18Z")

</div>

So do anyone know if the plastic ‘glass’ which comes in standard IKEA picture frames can be engraved with a laser.

Their website just says ‘polystrene plastic’ (it’s called the Ribba frame in the UK).

Is that safe to use???

---

<div class="post-metadata">

**Author:** ![Dave01](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/3d9bf3/32.png) [@Dave01](https://forum.lightburnsoftware.com/u/Dave01)\
**Post date:** [October 24, 2020, 3:09pm UTC](https://forum.lightburnsoftware.com/t/is-this-safe-to-engrave-on/24456/2 "2020-10-24T15:09:20Z")

</div>

Flame test it. Heat a solid copper wire in a propane torch, then get a bit of melted plastic on the wire and bring back to the torch. If it has green flame you have chlorine, a definite no go. There is a plastic, has a four letter name but I can’t remember it off the top of my head. It will cut UGLY, STINK, and the edges of the cut will be brown and not any where close to clean cuts… but at least the fumes will not kill you.

---

<div class="post-metadata">

**Author:** ![Stroonzo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/stroonzo/32/8293_2.png) [@Stroonzo](https://forum.lightburnsoftware.com/u/Stroonzo)\
**Post date:** [October 24, 2020, 3:35pm UTC](https://forum.lightburnsoftware.com/t/is-this-safe-to-engrave-on/24456/3 "2020-10-24T15:35:05Z")

</div>

Info on the Beilstein test:

> [@Call the police. I broke the law!](https://forum.lightburnsoftware.com/t/call-the-police-i-broke-the-law/14509):
>
> Don’t try this at home. PVC kills (your machine and possibly you). I was testing something “special”.

---

<div class="post-metadata">

**Author:** ![Stroonzo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/stroonzo/32/8293_2.png) [@Stroonzo](https://forum.lightburnsoftware.com/u/Stroonzo)\
**Post date:** [October 24, 2020, 3:39pm UTC](https://forum.lightburnsoftware.com/t/is-this-safe-to-engrave-on/24456/4 "2020-10-24T15:39:26Z")

</div>

> [@Dave01](#):
>
> If it has green flame you have chlorine

The green flame color, if observed, is produced by the presence of organic halides.

---

<div class="post-metadata">

**Author:** ![beamer3.6](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/e480ec/32.png) [@beamer3.6](https://forum.lightburnsoftware.com/u/beamer3.6)\
**Post date:** [October 24, 2020, 6:08pm UTC](https://forum.lightburnsoftware.com/t/is-this-safe-to-engrave-on/24456/5 "2020-10-24T18:08:03Z")

</div>

Unfortunately I dont have the frame or a blow torch or copper wire to test it.
