# Kretanje lasera od tačke A do tačke B

**URL:** <https://forum.lightburnsoftware.com/t/kretanje-lasera-od-tacke-a-do-tacke-b/45144>\
**Category:** Community Laser Talk\
**Created:** [August 4, 2021, 7:38pm UTC](https://forum.lightburnsoftware.com/t/kretanje-lasera-od-tacke-a-do-tacke-b/45144 "2021-08-04T19:38:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ahmed123](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/a/cab0a1/32.png) [@Ahmed123](https://forum.lightburnsoftware.com/u/Ahmed123)\
**Post date:** [August 4, 2021, 7:38pm UTC](https://forum.lightburnsoftware.com/t/kretanje-lasera-od-tacke-a-do-tacke-b/45144/1 "2021-08-04T19:38:46Z")

</div>

![20210802_192618](https://forum.lightburnsoftware.com/uploads/default/original/3X/1/9/19166e3faa2b6143247adfe6e6d5a8c6903e5a8d.jpeg)  
Pozdrav,  
Imam jedno pitanje. Prilikom graviranja i rezanja kada moj laser ide od tačke A do tačke B ne gasi se nego ostavlja prelaze ucrtane u materijal.  
Kako da ugasim tu opciju?

> Hello,  
> I have a question. When engraving and cutting when my laser goes from point A to point B it does not go out but leaves transitions drawn into the material.  
> How do I turn off that option?

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [August 4, 2021, 8:14pm UTC](https://forum.lightburnsoftware.com/t/kretanje-lasera-od-tacke-a-do-tacke-b/45144/2 "2021-08-04T20:14:39Z")

</div>

> [@Laser not turning off between cuts? (burning during travel moves)](https://forum.lightburnsoftware.com/t/laser-not-turning-off-between-cuts-burning-during-travel-moves/8528):
>
> If you have a GRBL device, and your laser is still on when moving between shapes, like this: [image] It most likely means you are using GRBL 1.1f or later, but do not have the controller in Laser Mode. Fix this by typing $32=1 in the Console window and pressing enter If you have a Ruida or other DSP controller and are seeing this happen, it is most likely a dying high-voltage power supply unit (PSU). The drive circuit that turns the laser power off and on tends to go first, before the part …

---

<div class="post-metadata">

**Author:** ![Ahmed123](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/a/cab0a1/32.png) [@Ahmed123](https://forum.lightburnsoftware.com/u/Ahmed123)\
**Post date:** [August 4, 2021, 9:24pm UTC](https://forum.lightburnsoftware.com/t/kretanje-lasera-od-tacke-a-do-tacke-b/45144/3 "2021-08-04T21:24:07Z")

</div>

Da bas tako, radi u praznom prostoru. Koristim lightburn zadnju verziju, te me zanima kojom komandom cu ugasiti laser prilikom kretanja u slobodnom prostoru. Btw hvala na odgovoru

> Yes, that’s right, he works in an empty space. I am using the latest version of lightburn, and I am interested in which command I will use to turn off the laser when moving in free space. Btw thanks for the reply

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [August 4, 2021, 10:10pm UTC](https://forum.lightburnsoftware.com/t/kretanje-lasera-od-tacke-a-do-tacke-b/45144/4 "2021-08-04T22:10:31Z")

</div>

What motion control system / controller is used to drive this laser?

I saw ‘Tree’ listed in your profile, and thought you are working with a GCode based system. Looking again, I see you also list 80W. Very different from what I was thinking, sorry for that.