# Laser bed lower in one corner

**URL:** <https://forum.lightburnsoftware.com/t/laser-bed-lower-in-one-corner/186883>\
**Category:** Community Laser Talk\
**Tags:** omtech\
**Created:** [January 18, 2026, 4:09pm UTC](https://forum.lightburnsoftware.com/t/laser-bed-lower-in-one-corner/186883 "2026-01-18T16:09:57Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![JWAR91](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/e95f7d/32.png) [@JWAR91](https://forum.lightburnsoftware.com/u/JWAR91)\
**Post date:** [January 18, 2026, 4:09pm UTC](https://forum.lightburnsoftware.com/t/laser-bed-lower-in-one-corner/186883/1 "2026-01-18T16:09:57Z")

</div>

On my Omtech Pronto 40 I am assuming it’s always been this way and I just never noticed but now that I have it’s driving me nuts. The magnets I use happen to be the perfect focal distance gauge so I always use them but I noticed yesterday that the bottom right corner seems to be almost double the distance from laser nozzle as the top left. So I checked the bottom left thinking maybe it’s sloped, nope seems to be the same as the top left same thing with the top right. So I thought maybe my honeycomb is warped so I pulled it and it seems to be the same thing with the blade bed as well so the problem has to be in the screws that lift/lower the bed. Anyone have any advice on how to tackle this issue? First time having anything like this happen so I’m kind of lost

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [January 18, 2026, 4:36pm UTC](https://forum.lightburnsoftware.com/t/laser-bed-lower-in-one-corner/186883/2 "2026-01-18T16:36:41Z")

</div>

These usually have 4 screws that control table height. Usually you can disconnect the belt and turn that one screw, the put the belt back on.

😺

---

<div class="post-metadata">

**Author:** ![JWAR91](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/e95f7d/32.png) [@JWAR91](https://forum.lightburnsoftware.com/u/JWAR91)\
**Post date:** [January 18, 2026, 4:41pm UTC](https://forum.lightburnsoftware.com/t/laser-bed-lower-in-one-corner/186883/3 "2026-01-18T16:41:12Z")

</div>

Thank you sir! I shall give that a try

---

<div class="post-metadata">

**Author:** ![JWAR91](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/e95f7d/32.png) [@JWAR91](https://forum.lightburnsoftware.com/u/JWAR91)\
**Post date:** [January 18, 2026, 5:49pm UTC](https://forum.lightburnsoftware.com/t/laser-bed-lower-in-one-corner/186883/4 "2026-01-18T17:49:11Z")

</div>

Easy fix with the advice, I appreciate you!

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [January 18, 2026, 6:38pm UTC](https://forum.lightburnsoftware.com/t/laser-bed-lower-in-one-corner/186883/5 "2026-01-18T18:38:11Z")

</div>

If it won’t adjust perfectly, some have a set screw (grub screw) you can loosen and move the pulley/screw assembly to correct for tooth offset.

Glad if fixed you up.

😺
