I have a sculpfun s30 Ultra 22w. I haven’t powered up my computer for one week and tonight I went in to do a quick burn and I cannot command my laser. It tells me either stream is complete in .06 seconds or it tells me it cannot find the limit. Now, when I set this all up, I set it up to home immediately on power up. It is not homing on power up at all. I am at a loss what could have happened in a weeks time when no one has touched my system. Console settings:
$$
$0=10
$1=0
$2=0
$3=0
$4=0
$5=0
$6=0
$10=115
$11=0.010
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=3
$24=25.000
$25=1000.000
$26=250
$27=2.000
$30=10000
$31=0
$32=0
$100=80.000
$101=80.000
$102=400.000
$110=2000.000
$111=2000.000
$112=1200.000
$120=300.000
$121=300.000
$122=30.000
$130=400.000
$131=380.000
$132=55.000
ok