Laser Fährt bei der Gravur nicht durch sondern bremst immer wieder (Laser does not drive through during engraving but brakes again and again)

so without (I) it also works and he makes the same movement.

Would be nice to get some more positive acknowledgment that it’s working. Try increasing the feedrate (F500) and see if there’s a difference.

Or just try adding this syntax to an image gcode and see if works. Maybe a small test.

If you want help with this try posting the gcode for a small image here and I’ll modify it.

; LightBurn 1.1.02
; Marlin device profile, absolute coords
; Bounds: X109.51 Y138.87 to X140.81 Y152.7
G21
G90
; Image @ 1500 mm/min, 1% power
M9
M05
G0 X130.109 Y138.872 F0
; Layer C00
G91
G1 X0.625 F1500 I S0
G1 X0.141 I S2.5
G1 X0.625 I S0
G1 X0.423Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.987 I S2.5
G1 X-4.093 I S0
G1 X-0.846 I S2.5
G1 X-2.964 I S0
G1 X-0.141 I S2.5
G1 X-0.625 I S0
G1 X-1.552Y0.141 I S0
G1 X0.625 I S0
G1 X4.092 I S2.5
G1 X0.283 I S0
G1 X1.552 I S2.5
G1 X3.104 I S0
G1 X1.835 I S2.5
G1 X0.625 I S0
G1 X0.141Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.565 I S2.5
G1 X-0.141 I S0
G1 X-0.282 I S2.5
G1 X-0.282 I S0
G1 X-0.847 I S2.5
G1 X-2.681 I S0
G1 X-0.706 I S2.5
G1 X-0.846 I S0
G1 X-2.681 I S2.5
G1 X-0.283 I S0
G1 X-0.141 I S2.5
G1 X-0.282 I S0
G1 X-3.104 I S2.5
G1 X-0.141 I S0
G1 X-0.142 I S2.5
G1 X-0.625 I S0
G1 X-0.846Y0.142 I S0
G1 X0.625 I S0
G1 X2.116 I S2.5
G1 X0.142 I S0
G1 X0.141 I S2.5
G1 X0.282 I S0
G1 X0.141 I S2.5
G1 X3.951 I S0
G1 X0.423 I S2.5
G1 X1.694 I S0
G1 X0.423 I S2.5
G1 X1.552 I S0
G1 X0.283 I S2.5
G1 X0.282 I S0
G1 X0.846 I S2.5
G1 X1.553 I S0
G1 X0.282 I S2.5
G1 X1.552 I S0
G1 X1.27 I S2.5
G1 X0.625 I S0
G1 X0.988Y0.141 I S0
G1 X-0.625 I S0
G1 X-2.822 I S2.5
G1 X-0.706 I S0
G1 X-0.423 I S2.5
G1 X-1.976 I S0
G1 X-2.963 I S2.5
G1 X-2.117 I S0
G1 X-0.141 I S2.5
G1 X-5.785 I S0
G1 X-1.412 I S2.5
G1 X-0.625 I S0
G1 X-0.705Y0.141 I S0
G1 X0.625 I S0
G1 X1.27 I S2.5
G1 X9.031 I S0
G1 X2.681 I S2.5
G1 X2.258 I S0
G1 X0.282 I S2.5
G1 X0.565 I S0
G1 X1.128 I S2.5
G1 X0.706 I S0
G1 X1.129 I S2.5
G1 X0.625 I S0
G1 X-0.141Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.565 I S2.5
G1 X-1.693 I S0
G1 X-0.706 I S2.5
G1 X-0.282 I S0
G1 X-0.423 I S2.5
G1 X-2.399 I S0
G1 X-2.399 I S2.5
G1 X-9.737 I S0
G1 X-1.27 I S2.5
G1 X-0.564 I S0
G1 X-0.988 I S2.5
G1 X-0.141 I S0
G1 X-0.282 I S2.5
G1 X-1.976 I S0
G1 X-0.141 I S2.5
G1 X-0.625 I S0
G1 X-0.423Y0.141 I S0
G1 X0.625 I S0
G1 X0.847 I S2.5
G1 X1.128 I S0
G1 X3.246 I S2.5
G1 X10.301 I S0
G1 X0.282 I S2.5
G1 X4.657 I S0
G1 X1.27 I S2.5
G1 X1.834 I S0
G1 X0.565 I S2.5
G1 X0.625 I S0
G1 Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.423 I S2.5
G1 X-1.976 I S0
G1 X-1.129 I S2.5
G1 X-4.798 I S0
G1 X-0.141 I S2.5
G1 X-0.705 I S0
G1 X-0.847 I S2.5
G1 X-9.596 I S0
G1 X-2.54 I S2.5
G1 X-0.987 I S0
G1 X-1.129 I S2.5
G1 X-0.625 I S0
G1 Y0.141 I S0
G1 X0.625 I S0
G1 X1.129 I S2.5
G1 X0.846 I S0
G1 X1.835 I S2.5
G1 X6.914 I S0
G1 X1.835 I S2.5
G1 X0.141 I S0
G1 X0.141 I S2.5
G1 X1.411 I S0
G1 X0.282 I S2.5
G1 X0.141 I S0
G1 X0.565 I S2.5
G1 X0.564 I S0
G1 X0.282 I S2.5
G1 X4.657 I S0
G1 X1.129 I S2.5
G1 X1.976 I S0
G1 X0.705 I S2.5
G1 X0.625 I S0
G1 X0.423Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.423 I S2.5
G1 X-0.282 I S0
G1 X-0.423 I S2.5
G1 X-1.976 I S0
G1 X-1.129 I S2.5
G1 X-3.104 I S0
G1 X-0.283 I S2.5
G1 X-1.27 I S0
G1 X-0.282 I S2.5
G1 X-0.423 I S0
G1 X-0.282 I S2.5
G1 X-0.283 I S0
G1 X-0.141 I S2.5
G1 X-1.27 I S0
G1 X-3.81 I S2.5
G1 X-5.785 I S0
G1 X-0.141 I S2.5
G1 X-1.411 I S0
G1 X-0.283 I S2.5
G1 X-0.846 I S0
G1 X-1.27 I S2.5
G1 X-0.625 I S0
G1 Y0.141 I S0
G1 X0.625 I S0
G1 X1.27 I S2.5
G1 X0.846 I S0
G1 X0.141 I S2.5
G1 X1.412 I S0
G1 X0.282 I S2.5
G1 X4.092 I S0
G1 X0.423 I S2.5
G1 X0.283 I S0
G1 X5.362 I S2.5
G1 X0.705 I S0
G1 X0.141 I S2.5
G1 X0.424 I S0
G1 X0.141 I S2.5
G1 X0.564 I S0
G1 X0.141 I S2.5
G1 X1.129 I S0
G1 X0.283 I S2.5
G1 X2.398 I S0
G1 X0.142 I S2.5
G1 X1.552 I S0
G1 X0.282 I S2.5
G1 X2.117 I S0
G1 X0.282 I S2.5
G1 X0.423 I S0
G1 X0.282 I S2.5
G1 X0.625 I S0
G1 X0.283Y0.142 I S0
G1 X-0.625 I S0
G1 X-0.283 I S2.5
G1 X-0.705 I S0
G1 X-0.282 I S2.5
G1 X-2.117 I S0
G1 X-0.282 I S2.5
G1 X-1.411 I S0
G1 X-0.283 I S2.5
G1 X-2.54 I S0
G1 X-0.282 I S2.5
G1 X-0.988 I S0
G1 X-0.141 I S2.5
G1 X-1.129 I S0
G1 X-0.282 I S2.5
G1 X-0.282 I S0
G1 X-0.706 I S2.5
G1 X-0.141 I S0
G1 X-5.08 I S2.5
G1 X-0.141 I S0
G1 X-0.564 I S2.5
G1 X-3.951 I S0
G1 X-0.141 I S2.5
G1 X-1.412 I S0
G1 X-0.282 I S2.5
G1 X-0.705 I S0
G1 X-1.411 I S2.5
G1 X-0.625 I S0
G1 Y0.141 I S0
G1 X0.625 I S0
G1 X1.411 I S2.5
G1 X0.705 I S0
G1 X0.282 I S2.5
G1 X1.27 I S0
G1 X0.283 I S2.5
G1 X3.527 I S0
G1 X0.565 I S2.5
G1 X0.423 I S0
G1 X5.221 I S2.5
G1 X0.565 I S0
G1 X0.846 I S2.5
G1 X2.117 I S0
G1 X0.282 I S2.5
G1 X2.681 I S0
G1 X0.424 I S2.5
G1 X1.27 I S0
G1 X0.282 I S2.5
G1 X2.258 I S0
G1 X0.141 I S2.5
G1 X0.705 I S0
G1 X0.424 I S2.5
G1 X0.625 I S0
G1 X0.141Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.282 I S2.5
G1 X-0.988 I S0
G1 X-0.141 I S2.5
G1 X-2.258 I S0
G1 X-0.141 I S2.5
G1 X-1.411 I S0
G1 X-0.424 I S2.5
G1 X-0.987 I S0
G1 X-1.27 I S2.5
G1 X-0.565 I S0
G1 X-0.423 I S2.5
G1 X-1.835 I S0
G1 X-0.423 I S2.5
G1 X-1.129 I S0
G1 X-5.221 I S2.5
G1 X-0.564 I S0
G1 X-0.565 I S2.5
G1 X-3.245 I S0
G1 X-0.283 I S2.5
G1 X-1.411 I S0
G1 X-0.282 I S2.5
G1 X-0.564 I S0
G1 X-1.411 I S2.5
G1 X-0.625 I S0
G1 X-0.142Y0.141 I S0
G1 X0.625 I S0
G1 X1.553 I S2.5
G1 X0.564 I S0
G1 X0.282 I S2.5
G1 X1.411 I S0
G1 X0.142 I S2.5
G1 X2.963 I S0
G1 X0.705 I S2.5
G1 X0.565 I S0
G1 X5.503 I S2.5
G1 X1.27 I S0
G1 X0.282 I S2.5
G1 X1.835 I S0
G1 X0.282 I S2.5
G1 X0.282 I S0
G1 X0.565 I S2.5
G1 X0.282 I S0
G1 X1.411 I S2.5
G1 X0.423 I S0
G1 X0.565 I S2.5
G1 X1.27 I S0
G1 X0.141 I S2.5
G1 X2.258 I S0
G1 X0.282 I S2.5
G1 X0.988 I S0
G1 X0.282 I S2.5
G1 X0.625 I S0
G1 Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.282 I S2.5
G1 X-0.988 I S0
G1 X-0.282 I S2.5
G1 X-0.565 I S0
G1 X-0.282 I S2.5
G1 X-1.411 I S0
G1 X-0.141 I S2.5
G1 X-1.27 I S0
G1 X-0.565 I S2.5
G1 X-0.282 I S0
G1 X-0.564 I S2.5
G1 X-1.694 I S0
G1 X-0.282 I S2.5
G1 X-0.282 I S0
G1 X-0.282 I S2.5
G1 X-1.835 I S0
G1 X-0.141 I S2.5
G1 X-1.27 I S0
G1 X-5.785 I S2.5
G1 X-0.706 I S0
G1 X-0.423 I S2.5
G1 X-2.822 I S0
G1 X-0.283 I S2.5
G1 X-1.27 I S0
G1 X-0.282 I S2.5
G1 X-0.564 I S0
G1 X-1.553 I S2.5
G1 X-0.625 I S0
G1 Y0.141 I S0
G1 X0.625 I S0
G1 X1.553 I S2.5
G1 X0.564 I S0
G1 X0.141 I S2.5
G1 X1.411 I S0
G1 X0.283 I S2.5
G1 X2.822 I S0
G1 X0.282 I S2.5
G1 X0.564 I S0
G1 X6.068 I S2.5
G1 X1.27 I S0
G1 X0.141 I S2.5
G1 X0.706 I S0
G1 X0.141 I S2.5
G1 X0.988 I S0
G1 X0.282 I S2.5
G1 X0.141 I S0
G1 X0.282 I S2.5
G1 X2.399 I S0
G1 X0.847 I S2.5
G1 X1.27 I S0
G1 X0.282 I S2.5
G1 X1.27 I S0
G1 X0.282 I S2.5
G1 X0.565 I S0
G1 X0.282 I S2.5
G1 X1.129 I S0
G1 X0.282 I S2.5
G1 X0.625 I S0
G1 X0.141Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.282 I S2.5
G1 X-1.27 I S0
G1 X-0.282 I S2.5
G1 X-0.424 I S0
G1 X-0.282 I S2.5
G1 X-1.411 I S0
G1 X-0.282 I S2.5
G1 X-1.27 I S0
G1 X-0.706 I S2.5
G1 X-2.54 I S0
G1 X-0.282 I S2.5
G1 X-0.282 I S0
G1 X-0.141 I S2.5
G1 X-0.988 I S0
G1 X-0.141 I S2.5
G1 X-0.847 I S0
G1 X-0.141 I S2.5
G1 X-1.129 I S0
G1 X-0.141 I S2.5
G1 X-1.27 I S0
G1 X-4.939 I S2.5
G1 X-0.282 I S0
G1 X-0.423 I S2.5
G1 X-2.823 I S0
G1 X-0.141 I S2.5
G1 X-1.411 I S0
G1 X-0.141 I S2.5
G1 X-0.564 I S0
G1 X-1.553 I S2.5
G1 X-0.625 I S0
G1 X-0.141Y0.141 I S0
G1 X0.625 I S0
G1 X1.694 I S2.5
G1 X0.423 I S0
G1 X0.282 I S2.5
G1 X1.411 I S0
G1 X0.141 I S2.5
G1 X2.823 I S0
G1 X0.282 I S2.5
G1 X0.423 I S0
G1 X4.798 I S2.5
G1 X1.411 I S0
G1 X0.141 I S2.5
G1 X0.988 I S0
G1 X0.282 I S2.5
G1 X0.847 I S0
G1 X0.282 I S2.5
G1 X0.847 I S0
G1 X0.141 I S2.5
G1 X0.141 I S0
G1 X0.282 I S2.5
G1 X2.822 I S0
G1 X0.706 I S2.5
G1 X1.129 I S0
G1 X0.282 I S2.5
G1 X1.411 I S0
G1 X0.282 I S2.5
G1 X0.424 I S0
G1 X0.141 I S2.5
G1 X1.552 I S0
G1 X0.282 I S2.5
G1 X0.625 I S0
G1 Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.282 I S2.5
G1 X-1.411 I S0
G1 X-0.282 I S2.5
G1 X-0.282 I S0
G1 X-0.424 I S2.5
G1 X-1.411 I S0
G1 X-0.282 I S2.5
G1 X-1.27 I S0
G1 X-0.565 I S2.5
G1 X-2.822 I S0
G1 X-0.282 I S2.5
G1 X-1.27 I S0
G1 X-0.141 I S2.5
G1 X-0.988 I S0
G1 X-0.141 I S2.5
G1 X-0.988 I S0
G1 X-0.141 I S2.5
G1 X-1.411 I S0
G1 X-4.657 I S2.5
G1 X-0.564 I S0
G1 X-0.282 I S2.5
G1 X-2.681 I S0
G1 X-0.283 I S2.5
G1 X-1.411 I S0
G1 X-0.282 I S2.5
G1 X-0.564 I S0
G1 X-1.553 I S2.5
G1 X-0.625 I S0
G1 Y0.142 I S0
G1 X0.625 I S0
G1 X1.553 I S2.5
G1 X0.564 I S0
G1 X0.141 I S2.5
G1 X1.552 I S0
G1 X0.141 I S2.5
G1 X2.823 I S0
G1 X0.282 I S2.5
G1 X0.423 I S0
G1 X4.657 I S2.5
G1 X1.411 I S0
G1 X0.282 I S2.5
G1 X0.847 I S0
G1 X0.282 I S2.5
G1 X0.988 I S0
G1 X0.141 I S2.5
G1 X1.27 I S0
G1 X0.282 I S2.5
G1 X2.822 I S0
G1 X0.565 I S2.5
G1 X1.411 I S0
G1 X0.141 I S2.5
G1 X1.411 I S0
G1 X0.424 I S2.5
G1 X0.282 I S0
G1 X0.282 I S2.5
G1 X1.552 I S0
G1 X0.282 I S2.5
G1 X0.625 I S0
G1 Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.282 I S2.5
G1 X-1.411 I S0
G1 X-0.423 I S2.5
G1 X-0.282 I S0
G1 X-0.424 I S2.5
G1 X-1.27 I S0
G1 X-0.282 I S2.5
G1 X-1.411 I S0
G1 X-0.423 I S2.5
G1 X-3.105 I S0
G1 X-0.282 I S2.5
G1 X-1.129 I S0
G1 X-0.141 I S2.5
G1 X-0.988 I S0
G1 X-0.282 I S2.5
G1 X-0.988 I S0
G1 X-0.141 I S2.5
G1 X-1.411 I S0
G1 X-4.233 I S2.5
G1 X-0.142 I S0
G1 X-0.282 I S2.5
G1 X-0.564 I S0
G1 X-0.141 I S2.5
G1 X-2.823 I S0
G1 X-0.282 I S2.5
G1 X-1.411 I S0
G1 X-0.282 I S2.5
G1 X-0.423 I S0
G1 X-1.553 I S2.5
G1 X-0.625 I S0
G1 Y0.141 I S0
G1 X0.625 I S0
G1 X1.553 I S2.5
G1 X0.423 I S0
G1 X0.282 I S2.5
G1 X1.552 I S0
G1 X0.141 I S2.5
G1 X2.823 I S0
G1 X0.141 I S2.5
G1 X0.564 I S0
G1 X0.282 I S2.5
G1 X0.988 I S0
G1 X3.528 I S2.5
G1 X1.129 I S0
G1 X0.282 I S2.5
G1 X0.847 I S0
G1 X0.282 I S2.5
G1 X1.129 I S0
G1 X0.282 I S2.5
G1 X0.988 I S0
G1 X0.282 I S2.5
G1 X3.105 I S0
G1 X0.423 I S2.5
G1 X1.411 I S0
G1 X0.141 I S2.5
G1 X1.552 I S0
G1 X0.283 I S2.5
G1 X0.282 I S0
G1 X0.564 I S2.5
G1 X1.411 I S0
G1 X0.141 I S2.5
G1 X0.625 I S0
G1 X0.142Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.283 I S2.5
G1 X-1.411 I S0
G1 X-0.423 I S2.5
G1 X-0.282 I S0
G1 X-0.424 I S2.5
G1 X-1.411 I S0
G1 X-0.282 I S2.5
G1 X-1.411 I S0
G1 X-0.565 I S2.5
G1 X-2.963 I S0
G1 X-0.282 I S2.5
G1 X-1.129 I S0
G1 X-0.141 I S2.5
G1 X-1.27 I S0
G1 X-0.282 I S2.5
G1 X-0.847 I S0
G1 X-0.141 I S2.5
G1 X-1.27 I S0
G1 X-3.387 I S2.5
G1 X-0.988 I S0
G1 X-0.282 I S2.5
G1 X-3.528 I S0
G1 X-0.282 I S2.5
G1 X-1.411 I S0
G1 X-0.282 I S2.5
G1 X-0.282 I S0
G1 X-1.835 I S2.5
G1 X-0.625 I S0
G1 Y0.141 I S0
G1 X0.625 I S0
G1 X1.694 I S2.5
G1 X0.423 I S0
G1 X0.282 I S2.5
G1 X1.552 I S0
G1 X0.141 I S2.5
G1 X3.528 I S0
G1 X0.141 I S2.5
G1 X0.988 I S0
G1 X3.669 I S2.5
G1 X0.988 I S0
G1 X0.282 I S2.5
G1 X0.847 I S0
G1 X0.282 I S2.5
G1 X1.27 I S0
G1 X0.141 I S2.5
G1 X1.129 I S0
G1 X0.141 I S2.5
G1 X3.104 I S0
G1 X0.424 I S2.5
G1 X1.411 I S0
G1 X0.423 I S2.5
G1 X1.411 I S0
G1 X0.283 I S2.5
G1 X0.423 I S0
G1 X0.423 I S2.5
G1 X1.411 I S0
G1 X0.283 I S2.5
G1 X0.625 I S0
G1 Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.142 I S2.5
G1 X-1.552 I S0
G1 X-0.423 I S2.5
G1 X-0.282 I S0
G1 X-0.424 I S2.5
G1 X-1.411 I S0
G1 X-0.282 I S2.5
G1 X-1.552 I S0
G1 X-0.565 I S2.5
G1 X-2.963 I S0
G1 X-0.282 I S2.5
G1 X-0.988 I S0
G1 X-0.282 I S2.5
G1 X-1.27 I S0
G1 X-0.141 I S2.5
G1 X-0.988 I S0
G1 X-0.282 I S2.5
G1 X-0.847 I S0
G1 X-3.669 I S2.5
G1 X-0.847 I S0
G1 X-0.282 I S2.5
G1 X-3.386 I S0
G1 X-0.283 I S2.5
G1 X-1.693 I S0
G1 X-0.141 I S2.5
G1 X-0.423 I S0
G1 X-1.694 I S2.5
G1 X-0.625 I S0
G1 Y0.141 I S0
G1 X0.625 I S0
G1 X1.694 I S2.5
G1 X0.423 I S0
G1 X0.141 I S2.5
G1 X1.693 I S0
G1 X0.283 I S2.5
G1 X3.386 I S0
G1 X0.282 I S2.5
G1 X0.847 I S0
G1 X4.798 I S2.5
G1 X0.847 I S0
G1 X0.282 I S2.5
G1 X1.27 I S0
G1 X0.282 I S2.5
G1 X1.129 I S0
G1 X0.282 I S2.5
G1 X2.822 I S0
G1 X0.424 I S2.5
G1 X1.552 I S0
G1 X0.423 I S2.5
G1 X1.411 I S0
G1 X0.424 I S2.5
G1 X0.282 I S0
G1 X0.423 I S2.5
G1 X1.694 I S0
G1 X0.141 I S2.5
G1 X0.625 I S0
G1 Y0.141 I S0
G1 X-0.625 I S0
G1 X-0.141 I S2.5
G1 X-1.694 I S0
G1 X-0.423 I S2.5
G1 X-0.282 I S0
G1 X-0.424 I S2.5
G1 X-1.411 I S0
G1 X-0.282 I S2.5
G1 X-1.693 I S0
G1 X-0.424 I S2.5
G1 X-2.822 I S0
G1 X-0.282 I S2.5
G1 X-1.129 I S0
G1 X-0.282 I S2.5
G1 X-1.27 I S0
G1 X-0.282 I S2.5
G1 X-1.129 I S0
G1 X-4.516 I S2.5
G1 X-0.847 I S0
G1 X-0.282 I S2.5
G1 X-3.386 I S0
G1 X-0.283 I S2.5
G1 X-1.693 I S0
G1 X-0.141 I S2.5
G1 X-0.423 I S0
G1 X-1.694 I S2.5
G1 X-0.625 I S0
G1 Y0.141 I S0
G1 X0.625 I S0
G1 X1.694 I S2.5
G1 X0.282 I S0
G1 X0.282 I S2.5
G1 X1.693 I S0
G1 X0.283 I S2.5
G1 X3.386 I S0
G1 X5.504 I S2.5
G1 X1.128 I S0
G1 X0.283 I S2.5
G1 X1.411 I S0
G1 X0.141 I S2.5
G1 X1.129 I S0
G1 X0.282 I S2.5
G1 X2.822 I S0
G1 X0.424 I S2.5
G1 X1.693 I S0
G1 X0.423 I S2.5
G1 X1.411 I S0
G1 X0.424 I S2.5
G1 X0.282 I S0
G1 X0.423 I S2.5
G1 X1.694 I S0
G1 X0.141 I S2.5
G1 X0.625 I S0
G1 X0.141Y0.142 I S0
G1 X0.625 I S0
G90
M9
M05
G90

it would be great if you would set it to me once so that I know that it was done right. :slight_smile:

Not certain if this will work but try it. I replaced the initial M05 with a M03 I.

marlin_image_inline.txt (12.9 KB)

this is the result of the file.

dose.txt (44.1 KB)

That’s terrible. Is that what it was supposed to look like?

Try the dose file.

dose M3 I.txt (44.1 KB)

unfortunately the laser only turns on and moves but it does not pulsate

Try with M4 version.

dose M4 I.txt (43.9 KB)

unfortunately always the same result

slowly I believe that it is because of the firmware and I may perhaps have to change something.
I’ve downloaded all the associated programs now, But I have no knowledge of it and now I have to teach myself the whole thing.

That sucks it’s not working. I think it’s worthwhile for you to work through it though as results will be much nicer.

1 Like

Thank you for your effort and time.

1 Like

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.