# Laser follows commands doesnt engrave

**URL:** <https://forum.lightburnsoftware.com/t/laser-follows-commands-doesnt-engrave/163159>\
**Category:** Community Laser Talk\
**Tags:** grbl\
**Created:** [January 22, 2025, 8:20pm UTC](https://forum.lightburnsoftware.com/t/laser-follows-commands-doesnt-engrave/163159 "2025-01-22T20:20:41Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![balsawoodben](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/5fc32e/32.png) [@balsawoodben](https://forum.lightburnsoftware.com/u/balsawoodben)\
**Post date:** [January 22, 2025, 8:20pm UTC](https://forum.lightburnsoftware.com/t/laser-follows-commands-doesnt-engrave/163159/1 "2025-01-22T20:20:41Z")

</div>

Been having problems my controller board and I have taken off the P-DA-01 off and just gone straight from the controller board 2 my Laser LT40-AA it follows commands but does not Burn I have reset the Lightburn to original my Conbtroller board is a JADAZI GRBL CNC Controller Control Board 3 Axis Stepper Motor…

---

<div class="post-metadata">

**Author:** ![JessN](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jessn/32/76466_2.png) [@JessN](https://forum.lightburnsoftware.com/u/JessN)\
**Post date:** [January 22, 2025, 8:31pm UTC](https://forum.lightburnsoftware.com/t/laser-follows-commands-doesnt-engrave/163159/2 "2025-01-22T20:31:37Z")

</div>

Here are some solutions you can try if your diode isn’t marking your material:

> **[GRBL: Low or No Power Output - LightBurn Documentation](https://docs.lightburnsoftware.com/latest/Troubleshooting/JobQuality/GRBLPowerOutput/)**
>
> Better software for laser cutters

Is the module emitting light or not? Why did you remove the [interface adaptor board?](https://lasertree.com/products/laser-tree-interface-driver-adapter-board?srsltid=AfmBOorW-SyEt-m-uRyW7k4oXTZUStblUaIgTNFP_O9-Kgeh1t1cOodx)

---

<div class="post-metadata">

**Author:** ![balsawoodben](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/5fc32e/32.png) [@balsawoodben](https://forum.lightburnsoftware.com/u/balsawoodben)\
**Post date:** [January 22, 2025, 8:35pm UTC](https://forum.lightburnsoftware.com/t/laser-follows-commands-doesnt-engrave/163159/3 "2025-01-22T20:35:27Z")

</div>

We tried everything with the Interface Adapter it wouldn’t come on so i am getting a new Controller board i will have it next week , but i want to get this running for now has i have a few things to do …

---

<div class="post-metadata">

**Author:** ![JessN](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jessn/32/76466_2.png) [@JessN](https://forum.lightburnsoftware.com/u/JessN)\
**Post date:** [January 22, 2025, 8:37pm UTC](https://forum.lightburnsoftware.com/t/laser-follows-commands-doesnt-engrave/163159/4 "2025-01-22T20:37:08Z")

</div>

Ah, so you’ve tried the troubleshooting tips provided by your laser manufacturer?

> **[Laser Module Troubleshooting](https://lasertree.com/blogs/blog-center/laser-module-troubleshooting?srsltid=AfmBOorVXXukPJ4e_7fgSZtT0cuX0KhuSgw9bY8Da_EHCZEqE8Qpt6_I)**
>
> This article is a collection of some of the problems or errors that have occurred during the use of Laser tree laser cutting modules. There are a number of checks you can perform when your work encounters a malfunction to try to identify potential...

---

<div class="post-metadata">

**Author:** ![balsawoodben](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/5fc32e/32.png) [@balsawoodben](https://forum.lightburnsoftware.com/u/balsawoodben)\
**Post date:** [January 22, 2025, 8:41pm UTC](https://forum.lightburnsoftware.com/t/laser-follows-commands-doesnt-engrave/163159/5 "2025-01-22T20:41:09Z")

</div>

The lad who was helping on it went through everything for two days i dont how he put with me had keep doing other things, I have a feeling its the Board wont get my other till probably monday…

---

<div class="post-metadata">

**Author:** ![balsawoodben](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/5fc32e/32.png) [@balsawoodben](https://forum.lightburnsoftware.com/u/balsawoodben)\
**Post date:** [January 22, 2025, 8:46pm UTC](https://forum.lightburnsoftware.com/t/laser-follows-commands-doesnt-engrave/163159/6 "2025-01-22T20:46:55Z")

</div>

The x and y max rate wasn’t the same as what you put i have changed it and checked but it hasn’t done anything…

---

<div class="post-metadata">

**Author:** ![JessN](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jessn/32/76466_2.png) [@JessN](https://forum.lightburnsoftware.com/u/JessN)\
**Post date:** [January 22, 2025, 9:09pm UTC](https://forum.lightburnsoftware.com/t/laser-follows-commands-doesnt-engrave/163159/7 "2025-01-22T21:09:28Z")

</div>

I think you should reach out to lasertree for their input here. They are the ones most familiar with your hardware and can offer solutions or a new board. The product description for the board says to consult the manual or reach out to them if you can’t get it to connect.

The first solution regarding x and y max rate wasn’t to change your machine settings, only to check them and make sure the units in the program match the units in your firmware:  
" Go to [Machine Settings](https://docs.lightburnsoftware.com/latest/Reference/MachineSettings/) or enter `$` in the [Console](https://docs.lightburnsoftware.com/latest/Reference/ConsoleWindow/) window to see the **$110/$111** , **X/Y Max rates** set in your machine’s firmware. The X and Y Maximum rates are the fastest you can command your machine to travel, in _mm/minute_ ."

---

<div class="post-metadata">

**Author:** ![balsawoodben](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/5fc32e/32.png) [@balsawoodben](https://forum.lightburnsoftware.com/u/balsawoodben)\
**Post date:** [January 23, 2025, 6:41pm UTC](https://forum.lightburnsoftware.com/t/laser-follows-commands-doesnt-engrave/163159/8 "2025-01-23T18:41:16Z")

</div>

Thanks Jess going to wait for my new controller board arrive before I try anything else I just have a feeling its the board ☹
