# Laser is Cutting Before Etching Regardless of Settings

**URL:** <https://forum.lightburnsoftware.com/t/laser-is-cutting-before-etching-regardless-of-settings/76294>\
**Category:** LightBurn Software Questions\
**Created:** [September 13, 2022, 4:37pm UTC](https://forum.lightburnsoftware.com/t/laser-is-cutting-before-etching-regardless-of-settings/76294 "2022-09-13T16:37:07Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![JoniStiner](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/f4b2a3/32.png) [@JoniStiner](https://forum.lightburnsoftware.com/u/JoniStiner)\
**Post date:** [September 13, 2022, 4:37pm UTC](https://forum.lightburnsoftware.com/t/laser-is-cutting-before-etching-regardless-of-settings/76294/1 "2022-09-13T16:37:07Z")

</div>

Hi! Hoping someone can help with this issue. I have my design set to etch as the first layer and then cut the design. Regardless of the setting it switches to cutting the design first every time. The issue started after the last software update, but the timing could be a coincidence. Has anyone else experienced this? Any help is greatly appreciated! Thanks!

---

<div class="post-metadata">

**Author:** ![Mooseuk](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/mooseuk/32/26201_2.png) [@Mooseuk](https://forum.lightburnsoftware.com/u/Mooseuk)\
**Post date:** [September 13, 2022, 6:43pm UTC](https://forum.lightburnsoftware.com/t/laser-is-cutting-before-etching-regardless-of-settings/76294/2 "2022-09-13T18:43:46Z")

</div>

Do you have ‘optimise cut path’ (laser window) enabled ? if so select ‘optimisation settings’ then order by layer, hopefully that will work for you 🤞

---

<div class="post-metadata">

**Author:** ![MrMag](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/mrmag/32/41390_2.png) [@MrMag](https://forum.lightburnsoftware.com/u/MrMag)\
**Post date:** [September 13, 2022, 6:45pm UTC](https://forum.lightburnsoftware.com/t/laser-is-cutting-before-etching-regardless-of-settings/76294/3 "2022-09-13T18:45:12Z")

</div>

Check this link: [Lightburn cutting then engraving, not in order sent to laser](https://forum.lightburnsoftware.com/t/lightburn-cutting-then-engraving-not-in-order-sent-to-laser/76116)

---

<div class="post-metadata">

**Author:** ![MrMag](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/mrmag/32/41390_2.png) [@MrMag](https://forum.lightburnsoftware.com/u/MrMag)\
**Post date:** [September 13, 2022, 6:46pm UTC](https://forum.lightburnsoftware.com/t/laser-is-cutting-before-etching-regardless-of-settings/76294/4 "2022-09-13T18:46:35Z")

</div>

Sorry Moose, I guess that was your reply in the link I submitted.

---

<div class="post-metadata">

**Author:** ![Mooseuk](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/mooseuk/32/26201_2.png) [@Mooseuk](https://forum.lightburnsoftware.com/u/Mooseuk)\
**Post date:** [September 13, 2022, 6:49pm UTC](https://forum.lightburnsoftware.com/t/laser-is-cutting-before-etching-regardless-of-settings/76294/5 "2022-09-13T18:49:29Z")

</div>

Better two replies than none Tim 👍 hope the op finds it useful

---

<div class="post-metadata">

**Author:** ![JoniStiner](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/f4b2a3/32.png) [@JoniStiner](https://forum.lightburnsoftware.com/u/JoniStiner)\
**Post date:** [September 13, 2022, 7:34pm UTC](https://forum.lightburnsoftware.com/t/laser-is-cutting-before-etching-regardless-of-settings/76294/6 "2022-09-13T19:34:03Z")

</div>

Thank you so much for your replies!!! That worked PERFECTLY! 🙂 Exactly what I needed!

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [October 13, 2022, 7:34pm UTC](https://forum.lightburnsoftware.com/t/laser-is-cutting-before-etching-regardless-of-settings/76294/7 "2022-10-13T19:34:24Z")

</div>

Closed on October 13, 2022, 7:34pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
