# Laser Master 2 Material Help!

**URL:** <https://forum.lightburnsoftware.com/t/laser-master-2-material-help/23591>\
**Category:** LightBurn Software Questions\
**Created:** [October 10, 2020, 2:29am UTC](https://forum.lightburnsoftware.com/t/laser-master-2-material-help/23591 "2020-10-10T02:29:26Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![CozyCo](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/c/c2a13f/32.png) [@CozyCo](https://forum.lightburnsoftware.com/u/CozyCo)\
**Post date:** [October 10, 2020, 4:35am UTC](https://forum.lightburnsoftware.com/t/laser-master-2-material-help/23591/2 "2020-10-10T04:35:14Z")

</div>

The best way is trial and error. Use this Material Cut/Scan Test Files - Power Scale to get you base line for each material.

> [@Material Cut/Scan Test Files - Power Scale](https://forum.lightburnsoftware.com/t/material-cut-scan-test-files-power-scale/436):
>
> UPDATE LightBurn now has a very powerful material testing tool built right in! Find it in the top bar menu under ‘Laser Tools \> Material Test Generator’ Please check out our documentation for a full run down on all the features: [Material Test - LightBurn Software Documentation](https://docs.lightburnsoftware.com/Tools/MaterialTest.html) If you’re here specifically looking for the manual material test files and instructions, click the arrow below. 
> 
> > **Expand this section to see manual material test files**
> >
> > Here is a test file created using the ‘Arra…

Good luck!

---

_[View the full topic](https://forum.lightburnsoftware.com/t/laser-master-2-material-help/23591)._