# Letters - Words

**URL:** <https://forum.lightburnsoftware.com/t/letters-words/189545>\
**Category:** MillMage Software Questions\
**Created:** [May 6, 2026, 5:07pm UTC](https://forum.lightburnsoftware.com/t/letters-words/189545 "2026-05-06T17:07:56Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![fotis](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/f/4af34b/32.png) [@fotis](https://forum.lightburnsoftware.com/u/fotis)\
**Post date:** [May 6, 2026, 5:07pm UTC](https://forum.lightburnsoftware.com/t/letters-words/189545/1 "2026-05-06T17:07:56Z")

</div>

How can I carve letters and words, I can’t find a way, even if it’s in a straight line without the ups and downs that v-bits do.

---

<div class="post-metadata">

**Author:** ![wanderingtruckie](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/wanderingtruckie/32/107530_2.png) [@wanderingtruckie](https://forum.lightburnsoftware.com/u/wanderingtruckie)\
**Post date:** [May 6, 2026, 5:45pm UTC](https://forum.lightburnsoftware.com/t/letters-words/189545/2 "2026-05-06T17:45:56Z")

</div>

if your meaning V carve thats not avaliable yet

I carve using a profile operation at present in MM, set cut to along line, finding the right text is the key at present , i use a very narrow text to get best results

as you can see bottom 3 fonts

are not clean done with a 60deg at 3 and 4 mm

top 2 are same narrow lettering , top is 90 deg at 3.5 mm

2nd line 60 deg at 4 mm deep

remember to H space lettering if you want gap between letters

 ![Messenger_creation_41392DFC-42BE-41F6-8FFB-8E8C152649D4](https://forum.lightburnsoftware.com/uploads/default/original/3X/9/9/99d38dc919223af7bbfc7d2019ae90037390b7ac.jpeg)

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/colin/32/41542_2.png) [@Colin](https://forum.lightburnsoftware.com/u/Colin)\
**Post date:** [May 6, 2026, 5:48pm UTC](https://forum.lightburnsoftware.com/t/letters-words/189545/3 "2026-05-06T17:48:23Z")

</div>

I would use a Profile operation and a cutter with the tip geometry you’re looking for: [Profile - MillMage Documentation](https://docs.millmagesoftware.com/0.8/Reference/OperationSettingsEditor/Profile/)

You could also try a fluting operation: [https://www.youtube.com/shorts/oAH1ZOkyXvM](https://www.youtube.com/shorts/oAH1ZOkyXvM)

---

<div class="post-metadata">

**Author:** ![fotis](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/f/4af34b/32.png) [@fotis](https://forum.lightburnsoftware.com/u/fotis)\
**Post date:** [May 6, 2026, 8:13pm UTC](https://forum.lightburnsoftware.com/t/letters-words/189545/4 "2026-05-06T20:13:34Z")

</div>

Thank you all for your time.

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [May 6, 2026, 9:21pm UTC](https://forum.lightburnsoftware.com/t/letters-words/189545/5 "2026-05-06T21:21:34Z")

</div>

We also support single-line fonts (SHX fonts, which you can find on the forum, and TTF single line fonts available here: [https://www.singlelinefonts.com/](https://www.singlelinefonts.com/))

Those would work with a narrow end, ball, or V mill, as a profile on the line.

---

<div class="post-metadata">

**Author:** ![wanderingtruckie](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/wanderingtruckie/32/107530_2.png) [@wanderingtruckie](https://forum.lightburnsoftware.com/u/wanderingtruckie)\
**Post date:** [May 7, 2026, 7:03pm UTC](https://forum.lightburnsoftware.com/t/letters-words/189545/6 "2026-05-07T19:03:48Z")

</div>

cheers for the link , that has never popped up when ive been searching for decent single line font hence using a fine line

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [May 7, 2026, 10:36pm UTC](https://forum.lightburnsoftware.com/t/letters-words/189545/7 "2026-05-07T22:36:18Z")

</div>

To assist with 👆:

> [@SHX Font Collection](https://forum.lightburnsoftware.com/t/shx-font-collection/25298):
>
> Now we have SHX Fonts available I have put together 44 single line fonts into a folder. I’m happy to make the folder of fonts available (dropbox link) if this is allowed and if anyone wants them. Update 2025-12-15 @ednisley The [newest link](https://www.burntstuff.com/shop/downloads) and [discussion](https://forum.lightburnsoftware.com/t/shx-font-collection-new-home/185935). For reference, the oldest link as an unclickable graphic just to show how popular it was: [LightBurn - old SHX collection link]

---

<div class="post-metadata">

**Author:** ![Gazman](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/g/ee7513/32.png) [@Gazman](https://forum.lightburnsoftware.com/u/Gazman)\
**Post date:** [May 8, 2026, 5:35pm UTC](https://forum.lightburnsoftware.com/t/letters-words/189545/10 "2026-05-08T17:35:04Z")

</div>

A nice selection of free single line fonts I put

together in my profile here: [Single line | Collection | FontSpace](https://www.fontspace.com/collection/single-line-cj7w104) 😉
