# Lightburn file and resulting cut don’t quite match… **URL:** \ **Category:** LightBurn Software Questions\ **Tags:** omtech\ **Created:** [February 1, 2026, 8:07am UTC](https://forum.lightburnsoftware.com/t/lightburn-file-and-resulting-cut-don-t-quite-match/187307 "2026-02-01T08:07:13Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\ **Post date:** [February 1, 2026, 11:54am UTC](https://forum.lightburnsoftware.com/t/lightburn-file-and-resulting-cut-don-t-quite-match/187307/3 "2026-02-01T11:54:31Z")
> [@Hairyspooner](#): > > then 1 cut at a very slight angle This could be another oddball case of the Ruida `PWM Rising Edge Valid` settings problem. It generally shows up with images, but dense vector patterns can also expose it. More discussion and what to do: > [@Image shifting and bunching up but cut out is OK](https://forum.lightburnsoftware.com/t/image-shifting-and-bunching-up-but-cut-out-is-ok/145984): > > Red-Black 90w Laser Ruida controller engrave 400mm/s 25% Fill 450mm/s 20% Cut 25mm/s 65% Birch ply held down pins belts are tight so are stepper motors When doing a engrave/fill and cut I get the fill shift while the engrave bunches up, cut out in just fine. This is repeatable, and all come out the same, like it was meant to be, how do I attach image? [Many more examples](https://forum.lightburnsoftware.com/search?q=%40ednisley%20ruida%20rising) … If that’s not the case, then upload one of the failing `lbrn2` files along with a [screenshot](https://www.take-a-screenshot.org/) of the (presumably correct) `Preview` and a crisp photo of the (incorrect) results to help us see what you’re seeing. --- _[View the full topic](https://forum.lightburnsoftware.com/t/lightburn-file-and-resulting-cut-don-t-quite-match/187307)._