# Lightburn galvo no qfacter and 3d slice

**URL:** <https://forum.lightburnsoftware.com/t/lightburn-galvo-no-qfacter-and-3d-slice/149106>\
**Category:** LightBurn Software Questions\
**Tags:** galvo\
**Created:** [September 5, 2024, 10:41pm UTC](https://forum.lightburnsoftware.com/t/lightburn-galvo-no-qfacter-and-3d-slice/149106 "2024-09-05T22:41:14Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Herb1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/h/bbce88/32.png) [@Herb1](https://forum.lightburnsoftware.com/u/Herb1)\
**Post date:** [September 5, 2024, 10:41pm UTC](https://forum.lightburnsoftware.com/t/lightburn-galvo-no-qfacter-and-3d-slice/149106/1 "2024-09-05T22:41:14Z")

</div>

I’ve seen many people using these on utube. Followed directions when downloading Light burn for galvo, everything else seems to work fine.  
Just no 3d slice and Q factor.  
Thank you in advance.  
Herb

---

<div class="post-metadata">

**Author:** ![Mooseuk](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/mooseuk/32/26201_2.png) [@Mooseuk](https://forum.lightburnsoftware.com/u/Mooseuk)\
**Post date:** [September 6, 2024, 8:41am UTC](https://forum.lightburnsoftware.com/t/lightburn-galvo-no-qfacter-and-3d-slice/149106/2 "2024-09-06T08:41:24Z")

</div>

You are showing your galvo as a Commarker B4, as I understand it, if it is not the Mopa version then the Q-Pulse option will be greyed out.

You should however still see the 3D sliced option in the cut settings for your image.

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/7/3/73bc1ab5956252b75dffe29c4cbd0e60c27626f8.png)

---

<div class="post-metadata">

**Author:** ![Herb1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/h/bbce88/32.png) [@Herb1](https://forum.lightburnsoftware.com/u/Herb1)\
**Post date:** [September 6, 2024, 3:38pm UTC](https://forum.lightburnsoftware.com/t/lightburn-galvo-no-qfacter-and-3d-slice/149106/3 "2024-09-06T15:38:28Z")

</div>

Hi David  
Thank You for the help., I really appreciate it.

```
        Best Regards 

```

Herb

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [October 6, 2024, 3:39pm UTC](https://forum.lightburnsoftware.com/t/lightburn-galvo-no-qfacter-and-3d-slice/149106/4 "2024-10-06T15:39:24Z")

</div>

Closed on October 6, 2024, 3:39pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.