I was attempting to start a project the other day and when I hit the start button my laser stopped after 0.00 seconds. I received the lost connection stream completed in 0.00 seconds.
I have disabled the usb sleep power settings and replaced the usb cord with a new cord as I suspected that could have been the issue. However after changing I am still getting the same issue.
What should I be looking to correct so I can be back up and burning again?
$0=10
$1=25
$2=0
$3=2
$4=0
$5=0
$6=0
$10=0
$11=0.010
$12=0.002
$13=1
$20=0
$21=0
$22=0
$23=0
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=1000
$31=0
$32=0
$100=80.000
$101=80.000
$102=800.000
$110=10000.000
$111=10000.000
$112=2000.000
$120=500.000
$121=500.000
$122=100.000
$130=200.000
$131=200.000
$132=175.000
Connection lost
Stream completed in 0:00
ok