# Lightburn stopps at 99%, but job is complete

**URL:** <https://forum.lightburnsoftware.com/t/lightburn-stopps-at-99-but-job-is-complete/53430>\
**Category:** NEJE\
**Created:** [December 4, 2021, 11:25am UTC](https://forum.lightburnsoftware.com/t/lightburn-stopps-at-99-but-job-is-complete/53430 "2021-12-04T11:25:31Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![DolSys](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/2bfe46/32.png) [@DolSys](https://forum.lightburnsoftware.com/u/DolSys)\
**Post date:** [December 4, 2021, 11:25am UTC](https://forum.lightburnsoftware.com/t/lightburn-stopps-at-99-but-job-is-complete/53430/1 "2021-12-04T11:25:31Z")

</div>

![Lightburn-Fehler](https://forum.lightburnsoftware.com/uploads/default/original/3X/8/b/8bf5d90aa2dc9f01c85db6fd22d171aac87355ed.jpeg)  
If I cut several passes, lightburn stopps at 99% if job is ready.  
The laser returns correct in end position, but I have to click “stopp” to end the job in lightburn, too.  
Laser is a NEJE Master 2S Pro.

---

<div class="post-metadata">

**Author:** ![itarozzi](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/itarozzi/32/34943_2.png) [@itarozzi](https://forum.lightburnsoftware.com/u/itarozzi)\
**Post date:** [December 9, 2021, 2:33pm UTC](https://forum.lightburnsoftware.com/t/lightburn-stopps-at-99-but-job-is-complete/53430/2 "2021-12-09T14:33:38Z")

</div>

The same to me using Ortur LM2 Pro S2.

---

<div class="post-metadata">

**Author:** ![Dancvmi93](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/f0a364/32.png) [@Dancvmi93](https://forum.lightburnsoftware.com/u/Dancvmi93)\
**Post date:** [November 19, 2022, 12:40pm UTC](https://forum.lightburnsoftware.com/t/lightburn-stopps-at-99-but-job-is-complete/53430/3 "2022-11-19T12:40:00Z")

</div>

I just purchased the Ortur LM3 and am having the same issue.

I’m also having issues where it looses connection during jobs.

Did you ever figure out a solution other than disconnecting and reconnecting it each time?

---

<div class="post-metadata">

**Author:** ![joel50](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/f07891/32.png) [@joel50](https://forum.lightburnsoftware.com/u/joel50)\
**Post date:** [February 28, 2023, 8:06pm UTC](https://forum.lightburnsoftware.com/t/lightburn-stopps-at-99-but-job-is-complete/53430/4 "2023-02-28T20:06:58Z")

</div>

i have the same issue afer installing 1.3.01. atomstack pro7. I’ve been fiddling with it to no avail.

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/colin/32/41542_2.png) [@Colin](https://forum.lightburnsoftware.com/u/Colin)\
**Post date:** [February 28, 2023, 11:09pm UTC](https://forum.lightburnsoftware.com/t/lightburn-stopps-at-99-but-job-is-complete/53430/5 "2023-02-28T23:09:45Z")

</div>

This may be due to the controllers for these GCode lasers being ESP32 based - please try going to ‘Edit \> Device settings \> Enable DTR signal’ and let us know if it solves your issue.

---

<div class="post-metadata">

**Author:** ![Dadgineered](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/eb8c5e/32.png) [@Dadgineered](https://forum.lightburnsoftware.com/u/Dadgineered)\
**Post date:** [August 23, 2023, 2:44pm UTC](https://forum.lightburnsoftware.com/t/lightburn-stopps-at-99-but-job-is-complete/53430/6 "2023-08-23T14:44:44Z")

</div>

I know its an older topic - but with more ESP32’s out there - want it to be known selecting Enable DTR fixed the problem for me.

---

<div class="post-metadata">

**Author:** ![anto](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/a/59ef9b/32.png) [@anto](https://forum.lightburnsoftware.com/u/anto)\
**Post date:** [August 22, 2026, 11:38am UTC](https://forum.lightburnsoftware.com/t/lightburn-stopps-at-99-but-job-is-complete/53430/7 "2026-08-22T11:38:01Z")

</div>

> [@Colin](#):
>
> b

Hi I am having this same issue job finishes but not stopped sits at 99% until I press stop

it was not a problem for last few years just started a while back

 ![99%](https://forum.lightburnsoftware.com/uploads/default/original/3X/1/7/1765163cfbed174b8c4d4389cdd250b1ca54629c.jpeg)
