Lineas en archivo

[miguelcorrea (miguel correa ahumada)]

hola
tengo el siguiente problema me salen esas lineas de union de las letras u objetos
eso me pasa cuando coloco lineas y relleno
como puedo solucionarlo.
slds

Translation:

Hello
I have the following problem I get those lines of union of the letters or objects
that happens to me when I put lines and fill
how can I solve that.

[LightBurn (Oz)]

Configuring a 3018 CNC (or other CNC-based laser) for use with LightBurn

The summary: Turn on Laser Mode to get rid of the travel lines You’re trying to move too fast, which is why you don’t get enough power You need to zero the machine 3018’s are pre-configured for use as CNC machines, not lasers, so their settings and speeds will likely need to be changed to give you acceptable results with LightBurn. To see the existing settings, you can type $$ into the console in LightBurn and press enter, or go to Edit > Machine Settings. Both are showing the same values, b…

Laser not turning off between cuts? (burning during travel moves)

If you have a GRBL device, and your laser is still on when moving between shapes, like this: [image] It most likely means you are using GRBL 1.1f or later, but do not have the controller in Laser Mode. Fix this by typing $32=1 in the Console window and pressing enter If you have a Ruida or other DSP controller and are seeing this happen, it is most likely a dying high-voltage power supply unit (PSU). The drive circuit that turns the laser power off and on tends to go first, before the part …

[miguelcorrea (miguel correa ahumada)]

muchas gracias
pero ahora tengo otro problema el quemado sale en modo espejo
que puede ser eso.

Translation:

Thanks a lot
but now I have another problem the burnt out in mirror mode
what can that be.

[LightBurn (Oz)]

The origin position will mirror your output. Make sure it is set properly:

[miguelcorrea (miguel correa ahumada)]

la maquina es una de 150cm x 150 cm
como puedo hacer que me reconozca todo el espacio?

[miguelcorrea (miguel correa ahumada)]

sorry

[LightBurn (Oz)]

Move the origin to the other side (right instead of left).

[miguelcorrea (miguel correa ahumada)]

muchas gracias!!