3018-pro with 5500 mw blue laser. from what i’ve read in multiple posts is that $32=1 should fix the traversal line problem but that doesn’t seem to be the case for me. i’ve used multiple programs and all result in the same issue.
laserburn 0.9.16 trial
grbl 1.1f
$0=10
$1=25
$2=0
$3=2
$4=0
$5=0
$6=0
$10=0
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=0
$23=0
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=1000
$31=0
$32=1
$100=800.000
$101=800.000
$102=800.000
$110=1000.000
$111=1000.000
$112=600.000
$120=30.000
$121=30.000
$122=30.000
$130=200.000
$131=200.000
$132=200.000