Hallo
I use a Longer B1 40 W and air. Since changeing to windows 11, I have problem with the speed .
It does not matter if the speed is set to10.000 mm/min or 2000mm/min, the working time is equal.
Result the power to high for the “old” parameters and cut now former engravings.
Has anyone an idea or can help me?
Best regards
Richard
In order to help you more appropriately, start lightburn, write $$ in the “Console” window, copy and paste all the content here so that it can be checked.
Auf Verbindung warten …
Auf Verbindung warten …
(/�Ť�)�����܉�Z�p%�%�kƥ�i�ok
ok
[LGT V1.2.3]
[VER:1.1.2023080801:]
[OPT:VPH,63,256]
Target buffer size found
[MSG:FW:LGT V1.2.3|MB:LS_ESP32]
[MSG:No Wifi]
ok
[G54:0.000,0.000,0.000]
[G55:0.000,0.000,0.000]
[G56:0.000,0.000,0.000]
[G57:0.000,0.000,0.000]
[G58:0.000,0.000,0.000]
[G59:0.000,0.000,0.000]
[G28:0.000,0.000,0.000]
[G30:0.000,0.000,0.000]
[G92:0.000,0.000,0.000]
[TLO:0.000]
[PRB:0.000,0.000,0.000:0]
ok
Grundstellung einnehmen
ok
Projekt in 23 Millisekunden geladen
$$
$54=123456789
$53=Xiaomi_C6AE
$52=12345678
$51=MKS_DLC
$0=10
$1=25
$2=0
$3=2
$4=0
$5=1
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=3
$24=25.000
$25=4000.000
$26=250.000
$27=1.000
$28=1000.000
$30=1000.000
$31=0.000
$32=1
$37=1
$47=1
$46=1
$44=1
$45=1
$49=1
$50=0
$48=1
$39=1
$42=1700
$43=5
$41=40
$40=200
$100=80.000
$101=80.000
$102=250.000
$103=100.000
$104=100.000
$105=100.000
$110=36000.000
$111=36000.000
$112=1000.000
$113=1000.000
$114=1000.000
$115=1000.000
$120=500.000
$121=500.000
$122=10.000
$123=200.000
$124=200.000
$125=200.000
$130=450.000
$131=440.000
$132=200.000
$133=300.000
$134=300.000
$135=300.000
ok
$$
$$
$54=123456789
$53=Xiaomi_C6AE
$52=12345678
$51=MKS_DLC
$0=10
$1=25
$2=0
$3=2
$4=0
$5=1
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=3
$24=25.000
$25=4000.000
$26=250.000
$27=1.000
$28=1000.000
$30=1000.000
$31=0.000
$32=1
$37=1
$47=1
$46=1
$44=1
$45=1
$49=1
$50=0
$48=1
$39=1
$42=1700
$43=5
$41=40
$40=200
$100=80.000
$101=80.000
$102=250.000
$103=100.000
$104=100.000
$105=100.000
$110=36000.000
$111=36000.000
$112=1000.000
$113=1000.000
$114=1000.000
$115=1000.000
$120=500.000
$121=500.000
$122=10.000
$123=200.000
$124=200.000
$125=200.000
$130=450.000
$131=440.000
$132=200.000
$133=300.000
$134=300.000
$135=300.000
ok
Sorry, but the parameters I imagined might be causing the problem seem fine to me.
I’m not an expert, but the information will be useful to others who can help more than I could.
I hope help arrives quickly. 
Export the settings on the old PC and import them on the new PC: