# Measurement on pdf and lightburn don’t match

**URL:** <https://forum.lightburnsoftware.com/t/measurement-on-pdf-and-lightburn-don-t-match/150766>\
**Category:** Tips and Tricks\
**Created:** [September 24, 2024, 8:36pm UTC](https://forum.lightburnsoftware.com/t/measurement-on-pdf-and-lightburn-don-t-match/150766 "2024-09-24T20:36:24Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [September 25, 2024, 12:48am UTC](https://forum.lightburnsoftware.com/t/measurement-on-pdf-and-lightburn-don-t-match/150766/5 "2024-09-25T00:48:26Z")

</div>

> [@Jmzcons](#):
>
> The cut size are different from the pdf file.

Although the laser motors on a Sculpfun _should_ be calibrated already, have you verified that a 1 inch square drawn in LightBurn produces a 1 inch square engraved on some cardboard? If not, then the [axes need calibrating](https://docs.lightburnsoftware.com/UI/MachineSettings.html#calibrate-axis).

Are you taking the laser kerf into account? If not, [measure the kerf](https://forum.lightburnsoftware.com/t/kerf-offset-test-with-built-in-vernier-scale-for-accuracy-no-tools-required/98333) and either [embiggen the parts with an offset](https://docs.lightburnsoftware.com/Tools/ModifierTools.html#offset) or apply a [kerf offset to the entire layer](https://docs.lightburnsoftware.com/UI/CutSettings/index.html#cut-settings-editor).

And, as @MikeyH points out, maybe the photocopy / print / scan / trace / whatever sequence has done some scale damage along the way. Checking that will depend on what went on, but consumer-grade printers are notorious for nonlinear distortions we never notice on a printed page. 😁

---

_[View the full topic](https://forum.lightburnsoftware.com/t/measurement-on-pdf-and-lightburn-don-t-match/150766)._
