# Need a restore file for Rudia RDC644XG

**URL:** <https://forum.lightburnsoftware.com/t/need-a-restore-file-for-rudia-rdc644xg/138835>\
**Category:** Ruida controllers\
**Created:** [May 13, 2024, 12:46am UTC](https://forum.lightburnsoftware.com/t/need-a-restore-file-for-rudia-rdc644xg/138835 "2024-05-13T00:46:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nini](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/n/b487fb/32.png) [@nini](https://forum.lightburnsoftware.com/u/nini)\
**Post date:** [May 13, 2024, 12:46am UTC](https://forum.lightburnsoftware.com/t/need-a-restore-file-for-rudia-rdc644xg/138835/1 "2024-05-13T00:46:36Z")

</div>

Hello.  
I made a dreadful mistake of factory reset, and now my machine is stuck at X-axis and Y-axis at 10000,10000 due to boot failure.  
With your help, I’ve realized the need for a backup file.  
Unfortunately, I don’t have a backup file from before the factory reset.  
Is there anyone who can provide me with an RDC644XG backup file?

Due to my limited English proficiency, I asked ChatGPT for translation assistance.  
I apologize if it sounds awkward or impolite.

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [May 13, 2024, 2:01pm UTC](https://forum.lightburnsoftware.com/t/need-a-restore-file-for-rudia-rdc644xg/138835/2 "2024-05-13T14:01:20Z")

</div>

Please don’t make multiple posts with the same issue … it makes it more difficult for us to help you and others.

> [@RDC644XG X and Y values remaining at 10000,10000](https://forum.lightburnsoftware.com/t/rdc644xg-x-and-y-values-remaining-at-10000-10000/138854):
>
> After a factory reset, I’m experiencing an issue where X and Y are set to 10000,10000. Although adjusting the step length allows reaching 0,0 without problems, upon reset, the values revert to 10000,10000. How can I ensure finding 0,0? If you know a solution, please help.

😸

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [June 12, 2024, 2:01pm UTC](https://forum.lightburnsoftware.com/t/need-a-restore-file-for-rudia-rdc644xg/138835/3 "2024-06-12T14:01:32Z")

</div>

Closed on June 12, 2024, 2:01pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
