# Need some clarification?

**URL:** <https://forum.lightburnsoftware.com/t/need-some-clarification/2841>\
**Category:** LightBurn Software Questions\
**Created:** [April 3, 2019, 8:21pm UTC](https://forum.lightburnsoftware.com/t/need-some-clarification/2841 "2019-04-03T20:21:06Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [April 3, 2019, 8:25pm UTC](https://forum.lightburnsoftware.com/t/need-some-clarification/2841/2 "2019-04-03T20:25:05Z")

</div>

Yes, have a look at this.

> [@Possible cutting (line) error](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/10):
>
> Min Power is used when your laser is at or below what’s called the “start speed” - IE, the speed at which it starts ramping power up to the Max Power setting. By default, on Ruida, it’s 10mm/sec. Glass tube lasers need a certain amount of power before they start ionizing and producing a beam. This is a higher value for larger tubes. Setting Min Power below this threshold means that when your laser starts moving, and is still using the “Min Power” setting, you get nothing. As it speeds up and…

---

_[View the full topic](https://forum.lightburnsoftware.com/t/need-some-clarification/2841)._
