# Neje 2s Plus A40640 no beam any more

**URL:** <https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335>\
**Category:** NEJE\
**Created:** [March 22, 2025, 6:14pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335 "2025-03-22T18:14:12Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kjaj](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/ee59a6/32.png) [@Kjaj](https://forum.lightburnsoftware.com/u/Kjaj)\
**Post date:** [March 22, 2025, 6:14pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/1 "2025-03-22T18:14:12Z")

</div>

Today while using my laser it was working perfectly.  
When started to make mine second project there is no beam any more.  
Did anyone had same experience please?  
Any advice?

---

<div class="post-metadata">

**Author:** ![Dskall](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/b5e925/32.png) [@Dskall](https://forum.lightburnsoftware.com/u/Dskall)\
**Post date:** [March 22, 2025, 7:31pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/2 "2025-03-22T19:31:53Z")

</div>

Is red light still lit on laser?

---

<div class="post-metadata">

**Author:** ![Kjaj](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/ee59a6/32.png) [@Kjaj](https://forum.lightburnsoftware.com/u/Kjaj)\
**Post date:** [March 22, 2025, 8:10pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/3 "2025-03-22T20:10:37Z")

</div>

Yes. Red light still there. Pulsing as usual

---

<div class="post-metadata">

**Author:** ![Dskall](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/b5e925/32.png) [@Dskall](https://forum.lightburnsoftware.com/u/Dskall)\
**Post date:** [March 23, 2025, 12:00am UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/4 "2025-03-23T00:00:34Z")

</div>

Can you manually fire laser?

---

<div class="post-metadata">

**Author:** ![Kjaj](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/ee59a6/32.png) [@Kjaj](https://forum.lightburnsoftware.com/u/Kjaj)\
**Post date:** [March 23, 2025, 8:33am UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/5 "2025-03-23T08:33:15Z")

</div>

How to do that please?

---

<div class="post-metadata">

**Author:** ![Dskall](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/b5e925/32.png) [@Dskall](https://forum.lightburnsoftware.com/u/Dskall)\
**Post date:** [March 24, 2025, 1:43am UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/6 "2025-03-24T01:43:33Z")

</div>

In move window.

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/f/c/fc46e55d828dcf6d2540cfae687c158d313b41c7.png)  
Also.  
[Guide to mechanical adjustments and maintenance](https://diode-laser-wiki.com/documentation/guide-to-mechanical-adjustments/#5V-Test)

---

<div class="post-metadata">

**Author:** ![Kjaj](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/ee59a6/32.png) [@Kjaj](https://forum.lightburnsoftware.com/u/Kjaj)\
**Post date:** [March 24, 2025, 11:18am UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/7 "2025-03-24T11:18:45Z")

</div>

Hi,  
I tried manually, no light.  
Took the lens off and still nothing.  
Disassembled unit and cleaned it, still nothing.  
Checked all connections and they all look ok.  
Any advice what to check next please?

---

<div class="post-metadata">

**Author:** ![misken](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/misken/32/47593_2.png) [@misken](https://forum.lightburnsoftware.com/u/misken)\
**Post date:** [March 24, 2025, 11:37am UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/8 "2025-03-24T11:37:20Z")

</div>

Check the cabling if there is a signal coming through.

---

<div class="post-metadata">

**Author:** ![Kjaj](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/ee59a6/32.png) [@Kjaj](https://forum.lightburnsoftware.com/u/Kjaj)\
**Post date:** [March 24, 2025, 11:46am UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/9 "2025-03-24T11:46:59Z")

</div>

How to check that please?

---

<div class="post-metadata">

**Author:** ![misken](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/misken/32/47593_2.png) [@misken](https://forum.lightburnsoftware.com/u/misken)\
**Post date:** [March 24, 2025, 2:56pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/10 "2025-03-24T14:56:15Z")

</div>

You could use a multimeter and measure if there is any voltage if you send a power signal.

---

<div class="post-metadata">

**Author:** ![Kjaj](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/ee59a6/32.png) [@Kjaj](https://forum.lightburnsoftware.com/u/Kjaj)\
**Post date:** [March 24, 2025, 5:22pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/11 "2025-03-24T17:22:50Z")

</div>

I don’t have a multimeter.  
Maybe my friend have it.  
Can you please advise what kind of set up on multimeter needs to be and where to connect it, on which wires please?

---

<div class="post-metadata">

**Author:** ![misken](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/misken/32/47593_2.png) [@misken](https://forum.lightburnsoftware.com/u/misken)\
**Post date:** [March 25, 2025, 8:57am UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/12 "2025-03-25T08:57:06Z")

</div>

The connector of the laser head usually has three pins. One is 12 or 24V, one is ground and the last one is the signal wire. This should have 5V at full power output. Maybe the friend can check this.

---

<div class="post-metadata">

**Author:** ![Kjaj](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/ee59a6/32.png) [@Kjaj](https://forum.lightburnsoftware.com/u/Kjaj)\
**Post date:** [March 26, 2025, 5:56pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/13 "2025-03-26T17:56:01Z")

</div>

Hi Melvin.  
I borrowed multimeter from my friend.  
Set it up like on the picture:  
[![](https://i.postimg.cc/v1Gh9JBd/IMG-20250326-172041.jpg)](https://postimg.cc/v1Gh9JBd)  
These are the wires:  
[![](https://i.postimg.cc/kV99kvJy/IMG-20250326-174710.jpg)](https://postimg.cc/kV99kvJy)  
When connecting Red and Yellow i was getting around 3.04, when pressing Fire in Lightburn then I was getting around 3.60.  
When connecting Red and Green or Red and Black I was getting around 12+.

What do you think about that results and set up of the multimeter?

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [April 25, 2025, 5:56pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-plus-a40640-no-beam-any-more/168335/14 "2025-04-25T17:56:53Z")

</div>

Closed on April 25, 2025, 5:56pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
