# Neje 2S Signal to Laser

**URL:** <https://forum.lightburnsoftware.com/t/neje-2s-signal-to-laser/175406>\
**Category:** NEJE\
**Created:** [July 13, 2025, 5:59pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-signal-to-laser/175406 "2025-07-13T17:59:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dbrunix](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/c4cdca/32.png) [@dbrunix](https://forum.lightburnsoftware.com/u/dbrunix)\
**Post date:** [July 13, 2025, 5:59pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-signal-to-laser/175406/1 "2025-07-13T17:59:25Z")

</div>

Neje 2S with Lightburn 1.7. Have been burning same image for days with no issues. Then the image started printing as if I had done a “mirrored Selection vertically”, but I didn’t . The image looks correct on the screen but is burning mirrored by the laser. Any idea of what might have happend please.

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [July 13, 2025, 7:11pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-signal-to-laser/175406/2 "2025-07-13T19:11:40Z")

</div>

This usually happens when the _ **origin** _ in the _ **device settings** _ is incorrect.

I’d suggest you check that.

😺

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [August 12, 2025, 7:12pm UTC](https://forum.lightburnsoftware.com/t/neje-2s-signal-to-laser/175406/3 "2025-08-12T19:12:35Z")

</div>

Closed on August 12, 2025, 7:12pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
