# Neje laser not connected in lightburn

**URL:** <https://forum.lightburnsoftware.com/t/neje-laser-not-connected-in-lightburn/132886>\
**Category:** OS Specific\
**Tags:** grbl, linux, neje\
**Created:** [March 12, 2024, 2:02pm UTC](https://forum.lightburnsoftware.com/t/neje-laser-not-connected-in-lightburn/132886 "2024-03-12T14:02:39Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![gilaraujo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/gilaraujo/32/71745_2.png) [@gilaraujo](https://forum.lightburnsoftware.com/u/gilaraujo)\
**Post date:** [March 15, 2024, 1:07pm UTC](https://forum.lightburnsoftware.com/t/neje-laser-not-connected-in-lightburn/132886/21 "2024-03-15T13:07:39Z")

</div>

What corner is home in your machine?

Edit → Device settings what Origin you are using

I remember that the homing corner and origin on Neje machines is not often the same

If you have the incorrect Origin in Edit → device settings it will reverse your engraving

---

<div class="post-metadata">

**Author:** ![lauranebzh](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/l/c57346/32.png) [@lauranebzh](https://forum.lightburnsoftware.com/u/lauranebzh)\
**Post date:** [March 15, 2024, 1:12pm UTC](https://forum.lightburnsoftware.com/t/neje-laser-not-connected-in-lightburn/132886/22 "2024-03-15T13:12:14Z")

</div>

the machine’s home is most often at neje on the motherboard side. or at my place in the back left. and I configured lightburn with a left rear origin, like during the evaluation version since it worked very well. but in this LB 1.5.3 is not well. if i change the origin in front right the red point is front right and the green poit is left rear. and if i ask to return at home the laser tries to exceed the limits and i vave a message alarm 9 ( i was read that is alam 9)  
console $# :  
[G54:0.000,0.000,0.000]

[G55:0.000,0.000,0.000]

[G56:0.000,0.000,0.000]

[G57:0.000,0.000,0.000]

[G58:0.000,0.000,0.000]

[G59:0.000,0.000,0.000]

[G28:0.000,0.000,0.000]

[G30:0.000,0.000,0.000]

[G92:0.000,0.000,0.000]

[TLO:0.000]

[PRB:0.000,0.000,0.000:0]

---

<div class="post-metadata">

**Author:** ![lauranebzh](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/l/c57346/32.png) [@lauranebzh](https://forum.lightburnsoftware.com/u/lauranebzh)\
**Post date:** [March 15, 2024, 4:02pm UTC](https://forum.lightburnsoftware.com/t/neje-laser-not-connected-in-lightburn/132886/23 "2024-03-15T16:02:31Z")

</div>

after checking with neje, I said something stupid: for my machine, the origin is in front left (but left rear for me because i see other side of machine), but when I ask for home from lightburn it always tries to force the limits. after disconnecting everything from the neje card then reconnecting everything, it seems to work correctly

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [April 14, 2024, 4:03pm UTC](https://forum.lightburnsoftware.com/t/neje-laser-not-connected-in-lightburn/132886/24 "2024-04-14T16:03:16Z")

</div>

Closed on April 14, 2024, 4:03pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.

[Previous page](https://forum.lightburnsoftware.com/t/neje-laser-not-connected-in-lightburn/132886.md?page=1)
