# New DSC laser and license?

**URL:** <https://forum.lightburnsoftware.com/t/new-dsc-laser-and-license/169031>\
**Category:** Licensing\
**Tags:** grbl, dsp\
**Created:** [March 30, 2025, 6:30pm UTC](https://forum.lightburnsoftware.com/t/new-dsc-laser-and-license/169031 "2025-03-30T18:30:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jaap326](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jaap326/32/118012_2.png) [@Jaap326](https://forum.lightburnsoftware.com/u/Jaap326)\
**Post date:** [March 30, 2025, 6:30pm UTC](https://forum.lightburnsoftware.com/t/new-dsc-laser-and-license/169031/1 "2025-03-30T18:30:02Z")

</div>

I have the standard license but I am getting an additional DSP machine. Is it correct that I now need to buy an upgrade for EUR 113,95 for the DSP machine to work? Will my GRBL machines also work with the PRO version. how does this work?

Thanks!  
Jaap

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [March 30, 2025, 7:01pm UTC](https://forum.lightburnsoftware.com/t/new-dsc-laser-and-license/169031/2 "2025-03-30T19:01:02Z")

</div>

The core only supports grbl. The pro upgrade will run the dsp and grbl. It supports the galvo also. Anyway, read about it here…

> **[LightBurn Software - Upgrade LightBurn Core to LightBurn Pro](https://lightburnsoftware.com/products/lightburn-software-upgrade-existing-license-key-to-pro)**
>
> If you already have LightBurn Core and now you want to use DSP or Galvo devices, this upgrade converts your LightBurn Core license key to LightBurn Pro so you can use DSP and Galvo devices in addition to the devices that Core already supported. This...

My current googling of $100 USD comes back as 92.52 Euro…

😺

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [April 29, 2025, 6:30pm UTC](https://forum.lightburnsoftware.com/t/new-dsc-laser-and-license/169031/3 "2025-04-29T18:30:20Z")

</div>

Closed on April 29, 2025, 6:30pm UTC

This topic was automatically closed after 30 days. New replies are no longer allowed.