Newbie needs Help with coordinates

[Rick (Technical Evangelist)]

They will stay this way until you change them. You can do that using the macros found in the Console window.

If you want to be able to flip from CNC work to Laser use and back, this is worth review.

Getting lines across when burning, and lettering looks like crap!

You need two macros - one for “Use Laser” and one for “Use CNC”. Their contents will be: Use Laser: $10=0 $30=1000 $32=1 G10 L2 P1 X-750 Y-750 Use CNC: $10=115 $30=1 $32=0 G10 L2 P1 X0 Y0 Prior to using the laser, click the ‘Use Laser’ macro button, and when you’re done and want to switch back to using the CNC, click the ‘Use CNC’ macro button. To define a macro, go to the console and right-click one of the buttons. Copy the code I wrote above and name the button accordingly. The ‘Use L…