# Offset Fill, Missing Spots, DSP

**URL:** <https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159>\
**Category:** LightBurn Software Questions\
**Tags:** dsp\
**Created:** [July 11, 2026, 5:22pm UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159 "2026-07-11T17:22:02Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![DanLand](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/b5a626/32.png) [@DanLand](https://forum.lightburnsoftware.com/u/DanLand)\
**Post date:** [July 11, 2026, 5:22pm UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159/1 "2026-07-11T17:22:02Z")

</div>

Is there a way to correct the “missed spots” when engraving using Offset Fill if I don’t have the overscanning setting?

Those little “tick” marks in the lower left corner were missed during engraving. The artwork is solid, if I do fill engraving everything is fine. I have a lot of brass tags to engraving. Being able to use Offset Fill will save me A LOT of time.

 ![IMG_7247](https://forum.lightburnsoftware.com/uploads/default/original/3X/3/3/3386fc63e388ae659e4514edc037a5c9a2ed7cd6.jpeg)

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [July 11, 2026, 6:10pm UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159/2 "2026-07-11T18:10:59Z")

</div>

For that simple shapes you can offset and repeat the outer shapes inward with a distance equal or slightly lower than your spot size.  
It’s almost the same without the voids.

---

<div class="post-metadata">

**Author:** ![DanLand](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/b5a626/32.png) [@DanLand](https://forum.lightburnsoftware.com/u/DanLand)\
**Post date:** [July 11, 2026, 6:33pm UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159/3 "2026-07-11T18:33:27Z")

</div>

The simple shape shown above was just for playing around with Offset Fill settings on a piece of black aluminum. The actual engraving is 5mm text on brass. The text, depending on the letter or number, has numerous missed spots.

For the large brass plates I am doing, if I do plain 'ole fill engraving, dark on brass, it takes about 35 minutes. If I do the same engraving but use Offsett Fill, they take about 4 minutes to engrave. I will have 40 plates that need to be done. These are regular orders and completely different text from order to order.

So I would really benefit from getting this Offset Fill to work without missing spots.

---

<div class="post-metadata">

**Author:** ![JimNM](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jimnm/32/78994_2.png) [@JimNM](https://forum.lightburnsoftware.com/u/JimNM)\
**Post date:** [July 11, 2026, 6:56pm UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159/4 "2026-07-11T18:56:02Z")

</div>

Increase LPI to reduce the gaps in your letters or soften the focus to enlarge the laser spot to fill in small gaps at the same LPI.

-or-

Have you explored using FLOOD FILL?

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [July 11, 2026, 11:22pm UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159/5 "2026-07-11T23:22:27Z")

</div>

> [@DanLand](#):
>
> really benefit from getting this Offset Fill to work without missing spot

If you study Offset Fill (I think OZ explained it in a posting somewhere), you will understand why those artifacts occur.

> [@JimNM](#):
>
> explored using FLOOD FILL?

Check all 3 FILL modes. I have had occasions where Offset took longer than Fill.

---

<div class="post-metadata">

**Author:** ![DanLand](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/b5a626/32.png) [@DanLand](https://forum.lightburnsoftware.com/u/DanLand)\
**Post date:** [July 12, 2026, 6:54pm UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159/6 "2026-07-12T18:54:37Z")

</div>

I’ve tried all the fill modes, offset fill is the quickest at 4 minutes. The next quickest is the flood fill at just under 13 minutes.

I understand why offset fill is missing spots, at the start-stop and random areas in the text. I was just hoping that there was a way to fix it so that function is actually usable.

---

<div class="post-metadata">

**Author:** ![JimNM](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jimnm/32/78994_2.png) [@JimNM](https://forum.lightburnsoftware.com/u/JimNM)\
**Post date:** [July 12, 2026, 7:08pm UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159/7 "2026-07-12T19:08:46Z")

</div>

Soften your focus to get a wider spot

-or-

Make your lines closer together to close those gaps.

-OR-

Do both at the same time for double the fun.

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [July 12, 2026, 11:40pm UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159/8 "2026-07-12T23:40:09Z")

</div>

> [@DanLand](#):
>
> hoping that there was a way to fix it so that function is actually usable

If you crank the power up and cook the bajeebies out of it, you will not notice the artifacts.

I have actually taken advantage of the Offset Fill creating a pattern on some projects. It gives it that unique look.

---

<div class="post-metadata">

**Author:** ![JimNM](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jimnm/32/78994_2.png) [@JimNM](https://forum.lightburnsoftware.com/u/JimNM)\
**Post date:** [July 13, 2026, 12:39am UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159/9 "2026-07-13T00:39:05Z")

</div>

If you are making text engravings, I have found that sans serif fonts work much better as they are generally constant width, and OFFSET fill builds a more solid structure with those. The more frills, serifs and fancy pants stuff means more computational hoops for the laser path.

+1 to the occasional use of OFFSET fill to obtain the patchwork artifacts on purpose. The preview button is my most often used command other than CTRL+Z 😵

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [August 12, 2026, 12:39am UTC](https://forum.lightburnsoftware.com/t/offset-fill-missing-spots-dsp/191159/10 "2026-08-12T00:39:29Z")

</div>

Closed on August 12, 2026, 12:39am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
