# OMTech MOPA 60W Autofocus Fiber Laser Not Communicating With Lightburn

**URL:** <https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214>\
**Category:** Ruida controllers\
**Tags:** mopa, omtech, jczfiber\
**Created:** [May 3, 2025, 7:55pm UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214 "2025-05-03T19:55:20Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![grayghost](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/grayghost/32/105341_2.png) [@grayghost](https://forum.lightburnsoftware.com/u/grayghost)\
**Post date:** [May 3, 2025, 7:55pm UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214/1 "2025-05-03T19:55:20Z")

</div>

I am at my wits end, I can’t get Lightburn to communicate with my OMTech MOPA 60W Autofocus Fiber Laser.

I’ve looked all over these forums and haven’t seen anything just like my issue. The main issue I’ve seen is making sure the EZCAD2 driver is installed during installation, and that has been done. I’ve also seen to make the Red Dot be on Port 4, which I’ve done.

Please help me! I’m both new to Fiber and Lightburn!!

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [May 3, 2025, 8:29pm UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214/2 "2025-05-03T20:29:16Z")

</div>

The EZCad driver is not compatible with Lightburn, as far as I know.

[![](https://img.youtube.com/vi/9e2dHOaqfU0/maxresdefault.jpg "How to Install LightBurn for Galvo, Drivers and Device Setup") ](https://www.youtube.com/watch?v=9e2dHOaqfU0)

See if this helps.. they also have a video on swapping drivers between Lightburn and EZCad2.

[![](https://img.youtube.com/vi/lGO9IsJbN14/maxresdefault.jpg "EASY! Swap Between LightBurn and Ezcad FAST") ](https://www.youtube.com/watch?v=lGO9IsJbN14)

Ensure you import your _ **markcfg7** _ file when you create a new device.

😺

---

<div class="post-metadata">

**Author:** ![grayghost](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/grayghost/32/105341_2.png) [@grayghost](https://forum.lightburnsoftware.com/u/grayghost)\
**Post date:** [May 3, 2025, 8:44pm UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214/3 "2025-05-03T20:44:02Z")

</div>

Thank you for this! Unfortunately, this was one of the videos I’ve already consulted and followed to a “T”.

I have also imported the markcfg7 file you recommended. I’m at a loss!!

---

<div class="post-metadata">

**Author:** ![grayghost](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/grayghost/32/105341_2.png) [@grayghost](https://forum.lightburnsoftware.com/u/grayghost)\
**Post date:** [May 3, 2025, 10:36pm UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214/4 "2025-05-03T22:36:38Z")

</div>

I might add that my situation is very similar to this:  
[OmTech laser does not frame but i can hear it - LightBurn Hardware Compatibility / Galvo - LightBurn Software Forum](https://forum.lightburnsoftware.com/t/omtech-laser-does-not-frame-but-i-can-hear-it/105177)

I can hear the framing as well as the laser when I send the commands. I feel like it’s a small setting issue I’m not seeing or a port issue. Here are screenshots of my settings:

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/5/8/58197600b304d903debc3150ad76e99d16e158b7.png)

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/4/c/4cc92395917df17eeeb3ccdbf92e6a5f06790024.png)  
 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/5/3/53513d2b3faf3e2e383d5b2109d1cb7a5055c25f.png)  
 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/4/d/4d224b4dc4563aca3d8f1d8342fd4e5f53116c17.png)

---

<div class="post-metadata">

**Author:** ![Ashley2](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ashley2/32/105442_2.png) [@Ashley2](https://forum.lightburnsoftware.com/u/Ashley2)\
**Post date:** [May 6, 2025, 6:04am UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214/5 "2025-05-06T06:04:31Z")

</div>

I’m using an OMTech 50W fiber laser and so far everything’s been working fine. I’m not sure what could be causing your issue, but maybe try reaching out to OMTech [support team](https://omtechlaser.au/pages/contact-us)? Hope it gets sorted soon!

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [May 6, 2025, 10:53am UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214/6 "2025-05-06T10:53:52Z")

</div>

I have a Cloudray M60 JPT M7 MOPA, in my configuration, It’s set it up as a JPT device, yours is set to IPG\_YLMP… Have you tried to use a different source type?

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/0/f/0fb0203a5b834b4b8f7b990e59a0c79b11c448f3.png)

These are the options:

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/3/1/313f9ceed5a0193e881bb25a8b21c8ae6fa1e079.png)

Do you know what laser source you have?

😺

---

<div class="post-metadata">

**Author:** ![grayghost](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/grayghost/32/105341_2.png) [@grayghost](https://forum.lightburnsoftware.com/u/grayghost)\
**Post date:** [May 7, 2025, 11:18pm UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214/7 "2025-05-07T23:18:07Z")

</div>

I have tried every source just to be sure, and nothing ☹

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [May 7, 2025, 11:44pm UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214/8 "2025-05-07T23:44:34Z")

</div>

The only thing I see, is my red dot is not enable or on #4. Don’t know what this controls.

I think you’re stuck going back to OMTech for their wisdom.

Good luck

😺

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [June 6, 2025, 11:45pm UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214/9 "2025-06-06T23:45:15Z")

</div>

Closed on June 6, 2025, 11:45pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
