# Ortur Laser 2 will come on but not burn

**URL:** <https://forum.lightburnsoftware.com/t/ortur-laser-2-will-come-on-but-not-burn/32415>\
**Category:** Ortur Lasers\
**Created:** [January 30, 2021, 2:01pm UTC](https://forum.lightburnsoftware.com/t/ortur-laser-2-will-come-on-but-not-burn/32415 "2021-01-30T14:01:20Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [February 6, 2021, 11:29pm UTC](https://forum.lightburnsoftware.com/t/ortur-laser-2-will-come-on-but-not-burn/32415/12 "2021-02-06T23:29:55Z")

</div>

@OrturTech, thoughts?

@LEESEUGEORGE, you may want to review the following and consider as an option.

> [@Light Burn configuration problem with Ortur Laser Master 2](https://forum.lightburnsoftware.com/t/light-burn-configuration-problem-with-ortur-laser-master-2/22155/13):
>
> $RST=\* resets your controller to its GRBL defaults
> 
> If you type $RST=\* in your console window, (making sure the connection state is NOT busy) the controller will reset to defaults.

---

_[View the full topic](https://forum.lightburnsoftware.com/t/ortur-laser-2-will-come-on-but-not-burn/32415)._