Ortur Laser Master 2

[ThePepcman (Jon hess)]

Having trouble getting my laser set up.
Not even sure how to describe the problem(s)
First it seem to want to travel outside the set area i.e when it stops at the corner the motor seems to still be running but unable to move.
I also get a Homing error
I get and Alarm9 error
I am also not seeing the laser light up to set the focus.

I am very new to this so excuse my ignorance but i could really use some help as i have been unable to find it with the traditional Google searches.

Thanks

[Rick (Technical Evangelist)]

While not exactly the same machine, start here. Let us know how you get on and we can go from there.

Configuring a 3018 CNC (or other CNC-based laser) for use with LightBurn

The summary: Turn on Laser Mode to get rid of the travel lines You’re trying to move too fast, which is why you don’t get enough power You need to zero the machine 3018’s are pre-configured for use as CNC machines, not lasers, so their settings and speeds will likely need to be changed to give you acceptable results with LightBurn. To see the existing settings, you can type $$ into the console in LightBurn and press enter, or go to Edit > Machine Settings. Both are showing the same values, b…