# Ortur laser Master not responding

**URL:** <https://forum.lightburnsoftware.com/t/ortur-laser-master-not-responding/67276>\
**Category:** LightBurn Hardware Compatibility\
**Tags:** grbl, rotary\
**Created:** [May 16, 2022, 6:24pm UTC](https://forum.lightburnsoftware.com/t/ortur-laser-master-not-responding/67276 "2022-05-16T18:24:39Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![berainlb](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/85f322/32.png) [@berainlb](https://forum.lightburnsoftware.com/u/berainlb)\
**Post date:** [May 16, 2022, 7:00pm UTC](https://forum.lightburnsoftware.com/t/ortur-laser-master-not-responding/67276/3 "2022-05-16T19:00:24Z")

</div>

Firmware updates for that line of Ortur are not supported on Mac. Or require a great deal of care to avoid issues due to MacOS writing files of its own to the drive.

I don’t see a clear path out but based on these Topics it seems there may be some ways out if you have access to a Windows computer or are familiar with chip programming.

> [@ORTUR LASER MASTER series v1.4 Firmware Release](https://forum.lightburnsoftware.com/t/ortur-laser-master-series-v1-4-firmware-release/30442):
>
> WINDOWS Computers ONLY - Do not Attempt on MAC/LINUX Change Log: V1.40 Release Date: 04 January 2021 Fixes: Pause/Resume issue been corrected. Laser Pause/Resume functions now work as expected; Corrected False positive [Check Limits] on Pro Motherboards (RJ connector/Vertical buttons boards); Improvements: GRBL Core Upgrade from 1.1f to 1.1h; Optimization of USB Driver Library. Attempt to address disconect issues/Alarm 3; Fan Delay ShutDown Function. Fan will Remain on from 30 to 120 sec…

> [@Ortur laser won't turn on after attempted firmware update](https://forum.lightburnsoftware.com/t/ortur-laser-wont-turn-on-after-attempted-firmware-update/14037):
>
> After trying to install Ortur firmware update ( [Ortur Laser Master 1.34](http://s000.tinyupload.com/?file_id=20540506184393439063)), update unsuccessful and now I can’t turn my laser on. I’m on a Mac, unplugged rebooted, faint red light is light on Ortur board.

---

_[View the full topic](https://forum.lightburnsoftware.com/t/ortur-laser-master-not-responding/67276)._
