# Ortur Rotary Chuck YRC 1.0 **URL:** \ **Category:** Ortur Lasers\ **Tags:** rotary, ortur\ **Created:** [December 8, 2024, 4:07pm UTC](https://forum.lightburnsoftware.com/t/ortur-rotary-chuck-yrc-1-0/158819 "2024-12-08T16:07:16Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Miro1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/a183cd/32.png) [@Miro1](https://forum.lightburnsoftware.com/u/Miro1)\ **Post date:** [December 8, 2024, 4:07pm UTC](https://forum.lightburnsoftware.com/t/ortur-rotary-chuck-yrc-1-0/158819/1 "2024-12-08T16:07:16Z")
Ortur Rotary Chuck YRC 1.0. Line artifacts remain to laseer the photo into the glass. The image is set DPI 500. What is the smallest step can this device so that artifacts disappear? The images are enlarged. ![20241208_164055 (1)](https://forum.lightburnsoftware.com/uploads/default/original/3X/9/a/9a2335d08d95a2b7d472dcc0ffd009120033acfb.jpeg) ![20241208_165319 (1)](https://forum.lightburnsoftware.com/uploads/default/original/3X/2/9/291908f7afc06da4f490f39aac490207501f34ff.jpeg) ---
**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\ **Post date:** [December 8, 2024, 9:21pm UTC](https://forum.lightburnsoftware.com/t/ortur-rotary-chuck-yrc-1-0/158819/2 "2024-12-08T21:21:36Z")
Hold it up to the screen so we can see it. If that does not work, upload an image of the problem. Until we see something we cannot advise. ---
**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\ **Post date:** [January 7, 2025, 9:22pm UTC](https://forum.lightburnsoftware.com/t/ortur-rotary-chuck-yrc-1-0/158819/3 "2025-01-07T21:22:07Z")
Closed on January 7, 2025, 9:22pm UTC This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.