# Possible cutting (line) error

**URL:** <https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383>\
**Category:** Common Problems\
**Created:** [March 21, 2019, 4:48am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383 "2019-03-21T04:48:09Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![CaptainsMastInc](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/captainsmastinc/32/1937_2.png) [@CaptainsMastInc](https://forum.lightburnsoftware.com/u/CaptainsMastInc)\
**Post date:** [March 21, 2019, 4:48am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/1 "2019-03-21T04:48:09Z")

</div>

I cut this logo out and noticed that the lines weren’t connecting to finish the cut. Maybe something with the program or maybe settings with my machine? Ruida controller 50w Chinese laser. 300mm x 500mm table.

 ![IMG_20190320_214527533](https://forum.lightburnsoftware.com/uploads/default/original/2X/1/15ea5dd9ac7d74730fef3ba249af7b902a396128.jpeg)

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [March 21, 2019, 4:55am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/2 "2019-03-21T04:55:36Z")

</div>

Post up your settings using a screen grab of the ‘Cut Settings Editor’ window and we can check them out.

My guess is you don’t have the min and max power settings correct. If you are trying to cut this out, set the min power closer to the max power setting to help complete the cut. To only mark the material, reduce the min power so you won’t get over-burn in the corners.

---

<div class="post-metadata">

**Author:** ![CaptainsMastInc](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/captainsmastinc/32/1937_2.png) [@CaptainsMastInc](https://forum.lightburnsoftware.com/u/CaptainsMastInc)\
**Post date:** [March 21, 2019, 5:06am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/5 "2019-03-21T05:06:54Z")

</div>

![image](https://forum.lightburnsoftware.com/uploads/default/original/2X/7/78f2d5f169d97044ccbde28f40594d88b26a3fd8.png)

I have min power at 1

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [March 21, 2019, 5:07am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/6 "2019-03-21T05:07:21Z")

</div>

Yes, that will be exactly the problem. Your laser won’t fire until roughly 10% of your tube wattage. If you have a 100w tube, it would be 10%. A 40w tube is roughly 4%. This is a ballpark, so yours might be different, but it’s standard fare for glass tube lasers.

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [March 21, 2019, 5:08am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/7 "2019-03-21T05:08:13Z")

</div>

Having ‘Min Power’ set to 1 is lower than your laser can fire. Set it just above the fire point for your setup. Try around 10 to 15 and adjust from there.

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/2X/5/59e714de3217072747554f91ebe59eb5481f4861.png)

or…just read the comment from Oz. He types faster that I do. 😉

---

<div class="post-metadata">

**Author:** ![CaptainsMastInc](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/captainsmastinc/32/1937_2.png) [@CaptainsMastInc](https://forum.lightburnsoftware.com/u/CaptainsMastInc)\
**Post date:** [March 21, 2019, 5:10am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/8 "2019-03-21T05:10:29Z")

</div>

I may have had one drink or two, but in a round about way… please explain min power if you wouldn’t mind. I read a post that was saying to have your min power at 1%. I cant quite pull it up at the moment but I figured the person knew what he was saying.

---

<div class="post-metadata">

**Author:** ![CaptainsMastInc](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/captainsmastinc/32/1937_2.png) [@CaptainsMastInc](https://forum.lightburnsoftware.com/u/CaptainsMastInc)\
**Post date:** [March 21, 2019, 5:11am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/9 "2019-03-21T05:11:01Z")

</div>

I have a 50watt tube

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [March 21, 2019, 5:15am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/10 "2019-03-21T05:15:24Z")

</div>

Min Power is used when your laser is at or below what’s called the “start speed” - IE, the speed at which it starts ramping power up to the Max Power setting. By default, on Ruida, it’s 10mm/sec.

Glass tube lasers need a certain amount of power before they start ionizing and producing a beam. This is a higher value for larger tubes. Setting Min Power below this threshold means that when your laser starts moving, and is still using the “Min Power” setting, you get nothing. As it speeds up and ramps the power up toward the “Max Power” setting, the tube fires and you get output, but your corners won’t cut because the laser has to slow down for them, and as it does, and comes close to stopping, the power ramps back down to “Min Power” again, and if it’s too low the tube stops firing.

> **[Min/Max Power (cutting)](https://rdworks.fandom.com/wiki/Min/Max_Power_(cutting))**
>
> As the laser head travels along a path, its speed varies, slowing as it turns corners and increasing to the speed set for the layer when moving in a straight line. By selecting suitable values for Min and Max Power, the depth of cut can be kept more...

---

<div class="post-metadata">

**Author:** ![CaptainsMastInc](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/captainsmastinc/32/1937_2.png) [@CaptainsMastInc](https://forum.lightburnsoftware.com/u/CaptainsMastInc)\
**Post date:** [March 21, 2019, 5:17am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/11 "2019-03-21T05:17:59Z")

</div>

Perfect. Explains a lot. Thank you!

---

<div class="post-metadata">

**Author:** ![CaptainsMastInc](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/captainsmastinc/32/1937_2.png) [@CaptainsMastInc](https://forum.lightburnsoftware.com/u/CaptainsMastInc)\
**Post date:** [March 21, 2019, 5:26am UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/12 "2019-03-21T05:26:00Z")

</div>

Just upped the min and adjusted a few things and it worked beautifully

---

<div class="post-metadata">

**Author:** ![raykholo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/raykholo/32/2170_2.png) [@raykholo](https://forum.lightburnsoftware.com/u/raykholo)\
**Post date:** [May 7, 2019, 8:08pm UTC](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/13 "2019-05-07T20:08:44Z")

</div>

Closed on May 7, 2019, 8:08pm UTC


