# Press Cut, only framing

**URL:** <https://forum.lightburnsoftware.com/t/press-cut-only-framing/115964>\
**Category:** Community Laser Talk\
**Created:** [November 8, 2023, 4:07pm UTC](https://forum.lightburnsoftware.com/t/press-cut-only-framing/115964 "2023-11-08T16:07:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![KBW1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/f19dbf/32.png) [@KBW1](https://forum.lightburnsoftware.com/u/KBW1)\
**Post date:** [November 8, 2023, 4:07pm UTC](https://forum.lightburnsoftware.com/t/press-cut-only-framing/115964/1 "2023-11-08T16:07:26Z")

</div>

Got it, reading is fundamental.

Hi, I’m not new to Lightburn or this forum, I now have a UV laser at home separate from my employer’s license.  
The issue is when I load my program with the output checked, and I hit Start the Framing window pops up. If I close Framing and hit Start again the framing window pops back up, if I let it frame, the laser never cuts.  
I’m sure it is a setting I am overlooking,

---

<div class="post-metadata">

**Author:** ![micrololin](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/micrololin/32/46353_2.png) [@micrololin](https://forum.lightburnsoftware.com/u/micrololin)\
**Post date:** [November 8, 2023, 6:54pm UTC](https://forum.lightburnsoftware.com/t/press-cut-only-framing/115964/2 "2023-11-08T18:54:13Z")

</div>

It’s been a bit since I’ve used my galvo laser. I remember clicking start and the frame window popped up and I needed to click start within that window also.

---

<div class="post-metadata">

**Author:** ![KBW1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/f19dbf/32.png) [@KBW1](https://forum.lightburnsoftware.com/u/KBW1)\
**Post date:** [November 8, 2023, 7:11pm UTC](https://forum.lightburnsoftware.com/t/press-cut-only-framing/115964/3 "2023-11-08T19:11:17Z")

</div>

Thank you, Jeff.  
I made a change to the settings that started Frame for every Start.
