# Preview Time Estimation is wrong / Laser slowed down

**URL:** <https://forum.lightburnsoftware.com/t/preview-time-estimation-is-wrong-laser-slowed-down/61754>\
**Category:** LightBurn Software Questions\
**Tags:** ruida\
**Created:** [March 6, 2022, 4:41pm UTC](https://forum.lightburnsoftware.com/t/preview-time-estimation-is-wrong-laser-slowed-down/61754 "2022-03-06T16:41:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![markus.schaefer](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/7feea3/32.png) [@markus.schaefer](https://forum.lightburnsoftware.com/u/markus.schaefer)\
**Post date:** [March 6, 2022, 4:41pm UTC](https://forum.lightburnsoftware.com/t/preview-time-estimation-is-wrong-laser-slowed-down/61754/1 "2022-03-06T16:41:45Z")

</div>

Hello,  
i have a problem with my OMTech 60 Watt Laser. I quess after one of the last updates the Preview time estimation is totally wrong and the engraving takes a lot longer than before. One topic could be that if there are several letters to engrave each letter is engraved one by one and it seems not be optimized. (eg. line by line for a hole word)  
Do you know the issue? I have an OMTech 60Watt laser and i am quite new in the business.

Thank you a lot.  
BR  
Markus

---

<div class="post-metadata">

**Author:** ![markus.schaefer](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/7feea3/32.png) [@markus.schaefer](https://forum.lightburnsoftware.com/u/markus.schaefer)\
**Post date:** [March 6, 2022, 5:07pm UTC](https://forum.lightburnsoftware.com/t/preview-time-estimation-is-wrong-laser-slowed-down/61754/2 "2022-03-06T17:07:28Z")

</div>

It seems that the Flood Fill was set somehow. no it is solved.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [April 5, 2022, 5:08pm UTC](https://forum.lightburnsoftware.com/t/preview-time-estimation-is-wrong-laser-slowed-down/61754/3 "2022-04-05T17:08:09Z")

</div>

Closed on April 5, 2022, 5:08pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
