# "Problem Sending File" message

**URL:** <https://forum.lightburnsoftware.com/t/problem-sending-file-message/1629>\
**Category:** Ruida controllers\
**Created:** [February 27, 2019, 8:17pm UTC](https://forum.lightburnsoftware.com/t/problem-sending-file-message/1629 "2019-02-27T20:17:40Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![boydster](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/boydster/32/2616_2.png) [@boydster](https://forum.lightburnsoftware.com/u/boydster)\
**Post date:** [February 27, 2019, 8:17pm UTC](https://forum.lightburnsoftware.com/t/problem-sending-file-message/1629/1 "2019-02-27T20:17:40Z")

</div>

Simple job…created a small circle in LB v8.07, sent it to my laser (Ruida) and cut it successfully. Copied and pasted the original circle to a new spot, deleted the original, turned off the “cut through” option and tried cutting the pasted circle…nada. Tried “cut selected” with same results. Both the laser and LB have been working flawlessly until now, tried rebooting the laser and the PC, different USB connection…no difference. Where to begin? - Thanks

---

<div class="post-metadata">

**Author:** ![boydster](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/boydster/32/2616_2.png) [@boydster](https://forum.lightburnsoftware.com/u/boydster)\
**Post date:** [February 27, 2019, 8:48pm UTC](https://forum.lightburnsoftware.com/t/problem-sending-file-message/1629/2 "2019-02-27T20:48:58Z")

</div>

So I walked away for 15 minutes, came back and tried once more and now everything works as it should. Dunno what’s going on; absolutely no settings were changed since my previous failed attempt.

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [February 27, 2019, 8:49pm UTC](https://forum.lightburnsoftware.com/t/problem-sending-file-message/1629/3 "2019-02-27T20:49:27Z")

</div>

Which OS, and what type of USB connection do you use in the software? (Packet/USB or Serial/USB?)

---

<div class="post-metadata">

**Author:** ![boydster](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/boydster/32/2616_2.png) [@boydster](https://forum.lightburnsoftware.com/u/boydster)\
**Post date:** [February 27, 2019, 9:11pm UTC](https://forum.lightburnsoftware.com/t/problem-sending-file-message/1629/4 "2019-02-27T21:11:06Z")

</div>

Windows 10, serial USB

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [February 27, 2019, 9:37pm UTC](https://forum.lightburnsoftware.com/t/problem-sending-file-message/1629/5 "2019-02-27T21:37:58Z")

</div>

I’d suggest installing this driver just to be sure. Windows 10 comes with an FTDI driver, but it’s not aways the most up to date version and has been known to be troublesome on occasion.

[https://www.ftdichip.com/Drivers/VCP.htm](https://www.ftdichip.com/Drivers/VCP.htm)

---

<div class="post-metadata">

**Author:** ![boydster](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/boydster/32/2616_2.png) [@boydster](https://forum.lightburnsoftware.com/u/boydster)\
**Post date:** [February 28, 2019, 12:48am UTC](https://forum.lightburnsoftware.com/t/problem-sending-file-message/1629/6 "2019-02-28T00:48:27Z")

</div>

Thanks! Will try it out.

---

<div class="post-metadata">

**Author:** ![raykholo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/raykholo/32/2170_2.png) [@raykholo](https://forum.lightburnsoftware.com/u/raykholo)\
**Post date:** [May 7, 2019, 8:41pm UTC](https://forum.lightburnsoftware.com/t/problem-sending-file-message/1629/7 "2019-05-07T20:41:03Z")

</div>

Closed on May 7, 2019, 8:41pm UTC


