# Question about the camera

**URL:** <https://forum.lightburnsoftware.com/t/question-about-the-camera/145695>\
**Category:** Cameras\
**Tags:** camera\
**Created:** [July 27, 2024, 5:57pm UTC](https://forum.lightburnsoftware.com/t/question-about-the-camera/145695 "2024-07-27T17:57:17Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jnl1105](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/a587f6/32.png) [@jnl1105](https://forum.lightburnsoftware.com/u/jnl1105)\
**Post date:** [July 27, 2024, 5:57pm UTC](https://forum.lightburnsoftware.com/t/question-about-the-camera/145695/1 "2024-07-27T17:57:18Z")

</div>

When one of the cameras is used does i then do you use the camera for absolute coordinates? I am wondering if I can use it as a finder for the location of the edge of the workspace and such instead of getting up to go verify. Basically tell me the benefits of the camera. I am thinking about mounting it on a gantry above both my cnc router and my laser so I can use it for both in laightburn. I was thinking about using a nema 17 and a controller to move the carriage back and forth depending on which one I want to use

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [July 27, 2024, 6:29pm UTC](https://forum.lightburnsoftware.com/t/question-about-the-camera/145695/2 "2024-07-27T18:29:34Z")

</div>

> [@jnl1105](#):
>
> do you use the camera for absolute coordinates

You _must_ use `Absolute Coordinates` with the camera updating the LightBurn workspace, so that the image corresponds to the physical layout.

The adjusted / corrected image will then allow positioning on the platform within a millimeter (more or less), so that you can avoid all the fiddling around with framing and suchlike.

> [@jnl1105](#):
>
> tell me the benefits of the camera

I use it for initial positioning:

- Open the LightBurn file with whatever I’m doing
- Update the camera image on the workspace
- Drag whatever I’m doing into position on the image
- Fire The Laser!

Frankly, I can’t imagine working without the camera.

Some background:

> **[Laser Cutter: LightBurn Camera Calibration](https://softsolder.com/2022/12/06/laser-cutter-lightburn-camera-calibration/)**
>
> The correction depends critically on the camera maintaining its position / orientation / focus

> **[Laser Cutter: LightBurn Camera Accuracy](https://softsolder.com/2022/12/07/laser-cutter-lightburn-camera-accuracy/)**
>
> But they’re not off by much

> [@jnl1105](#):
>
> move the carriage back and forth

That will most likely _not_ work, because the camera position must be absolutely constant after calibration / adjustment. Even sub-millimeter camera motion will wreck the image positioning at the platform surface.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [August 26, 2024, 6:30pm UTC](https://forum.lightburnsoftware.com/t/question-about-the-camera/145695/3 "2024-08-26T18:30:28Z")

</div>

Closed on August 26, 2024, 6:30pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
