Question about wires left over for limit switches

[htrowrod (bruce Dorworth)]

Jpjacobs, did you happen to see my post with the pictures of the wires left over for my Limits switches?
I would really appreciate your thoughts on this issue.
Thanks,
Bruce

[Blake (Blake Bartlett)]

@jpjacobs If you put an @ sign before the name, it will tag the user, letting them know you mentioned them. If it’s a more private matter, you can also message them individually by clicking their name, and then clicking the message button.

[jpjacobs (jj)]

Thanks for letting me know. Already replied in original topic.

Machine limit issues

Sorry for not coming back to your earlier. I had a look and as far as I can see your limits were bridged on your old setup. You have a connection from pin 5 to pin 1 and 2 on X5 and X4. Pin 5 is +24V and pin 1 and 2 are the min and max limits. Could it be that you had them disabled in the old setup? Here is a diagram for connecting the wiring to the Ruida controller: [image] Basically run a wire from GND to your limit switch and then run a wire from the limit switch to the ruida controller. …