# RDC6442s and 2 lasers

**URL:** <https://forum.lightburnsoftware.com/t/rdc6442s-and-2-lasers/19180>\
**Category:** LightBurn Hardware Compatibility\
**Created:** [July 21, 2020, 2:44am UTC](https://forum.lightburnsoftware.com/t/rdc6442s-and-2-lasers/19180 "2020-07-21T02:44:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![BaronPork](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/c6cbf5/32.png) [@BaronPork](https://forum.lightburnsoftware.com/u/BaronPork)\
**Post date:** [July 21, 2020, 2:44am UTC](https://forum.lightburnsoftware.com/t/rdc6442s-and-2-lasers/19180/1 "2020-07-21T02:44:39Z")

</div>

I was wondering, would it be possible to hook up a diode to an existing co2 setup as a second “tube” ?  
Just a thought i had, if i need a much lower power for darkening materials, less cutting.  
I’ve seen settings in rdc and lb/rdw for 2 tube operation, etc.

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [July 21, 2020, 2:50am UTC](https://forum.lightburnsoftware.com/t/rdc6442s-and-2-lasers/19180/2 "2020-07-21T02:50:25Z")

</div>

Searching for “connect diode to ruida” I found this:

> [@Combination CO2 and Diode laser in same machine](https://forum.lightburnsoftware.com/t/combination-co2-and-diode-laser-in-same-machine/8877):
>
> Another question here got me to thinking about combining a CO2 laser and Diode laser in the same machine. I know some Ruida controllers have the ability to control 2 laser heads. Would controlling the Diode laser be simple? This is just a silly idea but curious if anyone has considered it or tried it.

And:

> [@Adding a diode to Ruida machine](https://forum.lightburnsoftware.com/t/adding-a-diode-to-ruida-machine/13630):
>
> I’m trying to add a diode laser to my Ruida CO2 machine for lower-power engraving. Specs: Ruida 6445G(EC) controller 100-watt Reci tube NUBM44 diode laser J-Tech Photonics [high-current laser driver](https://jtechphotonics.com/?page_id=126) The driver has very simple connections: power in (from its own power supply), PWM in and power out to the laser. I know these are connected properly as they’re clearly labeled on the PCB itself: I have the PWM in connected to pins 1 and 3 (LPWM2 and GND…

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [August 20, 2020, 2:50am UTC](https://forum.lightburnsoftware.com/t/rdc6442s-and-2-lasers/19180/3 "2020-08-20T02:50:26Z")

</div>

Closed on August 20, 2020, 2:50am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
