# Reverse Scan Interval

**URL:** <https://forum.lightburnsoftware.com/t/reverse-scan-interval/1645>\
**Category:** LightBurn Software Questions\
**Created:** [February 28, 2019, 4:26am UTC](https://forum.lightburnsoftware.com/t/reverse-scan-interval/1645 "2019-02-28T04:26:31Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Superoo](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/7bcc69/32.png) [@Superoo](https://forum.lightburnsoftware.com/u/Superoo)\
**Post date:** [February 28, 2019, 4:26am UTC](https://forum.lightburnsoftware.com/t/reverse-scan-interval/1645/1 "2019-02-28T04:26:31Z")

</div>

Hi,  
I have searched but cant find anything here…

When Scanning, the laser head position (and the etching lines) changes slightly on the x axis, on each pass in the opposite direction.

I am told this is caused by slight belt stretch, and in RDworks etc it can be adjusted out in a software x axis setting caslled ‘Reverse Scan Interval’.

Am I able to adjust this out in Lightburn ?

Thank You, love Lightburtn software, purchasing now…

Cheers,  
Chris

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [February 28, 2019, 4:43am UTC](https://forum.lightburnsoftware.com/t/reverse-scan-interval/1645/2 "2019-02-28T04:43:41Z")

</div>

Hi Chris - in LightBurn it’s called “Scanning Offset Adjustment” but it works the same as in RDWorks. It’s a table in the Device Settings, and the documentation is here: [https://github.com/LightBurnSoftware/Documentation/blob/master/ScanningOffsetAdjustment.md](https://github.com/LightBurnSoftware/Documentation/blob/master/ScanningOffsetAdjustment.md)

Make sure you have at least two entries, increasing in distance, and the software will extrapolate others from those two.

---

<div class="post-metadata">

**Author:** ![Superoo](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/7bcc69/32.png) [@Superoo](https://forum.lightburnsoftware.com/u/Superoo)\
**Post date:** [February 28, 2019, 4:45am UTC](https://forum.lightburnsoftware.com/t/reverse-scan-interval/1645/3 "2019-02-28T04:45:35Z")

</div>

Thanks Oz, I found that before I saw your response.

But having the 2 entries is a good tip,

Your prompt response is MUCH appreciated, have just purchased Lightburn 🙂

---

<div class="post-metadata">

**Author:** ![Superoo](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/7bcc69/32.png) [@Superoo](https://forum.lightburnsoftware.com/u/Superoo)\
**Post date:** [February 28, 2019, 4:47am UTC](https://forum.lightburnsoftware.com/t/reverse-scan-interval/1645/4 "2019-02-28T04:47:55Z")

</div>

Hey Oz is there a sample material settings file / template for Mac ?

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [February 28, 2019, 5:22am UTC](https://forum.lightburnsoftware.com/t/reverse-scan-interval/1645/5 "2019-02-28T05:22:41Z")

</div>

No, not really. It’s meant to be “create as you go”.

---

<div class="post-metadata">

**Author:** ![Superoo](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/7bcc69/32.png) [@Superoo](https://forum.lightburnsoftware.com/u/Superoo)\
**Post date:** [February 28, 2019, 9:52am UTC](https://forum.lightburnsoftware.com/t/reverse-scan-interval/1645/6 "2019-02-28T09:52:23Z")

</div>

All good - thank you…

---

<div class="post-metadata">

**Author:** ![JohnJohn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/johnjohn/32/37027_2.png) [@JohnJohn](https://forum.lightburnsoftware.com/u/JohnJohn)\
**Post date:** [April 8, 2022, 2:59am UTC](https://forum.lightburnsoftware.com/t/reverse-scan-interval/1645/7 "2022-04-08T02:59:59Z")

</div>

Closed on April 8, 2022, 2:59am UTC


