# Rotary connection

**URL:** <https://forum.lightburnsoftware.com/t/rotary-connection/15452>\
**Category:** Galvo\
**Tags:** ezcad2, galvo-rotary\
**Created:** [May 2, 2020, 11:56am UTC](https://forum.lightburnsoftware.com/t/rotary-connection/15452 "2020-05-02T11:56:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![gerardfleming987](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/g/b3f665/32.png) [@gerardfleming987](https://forum.lightburnsoftware.com/u/gerardfleming987)\
**Post date:** [May 2, 2020, 11:56am UTC](https://forum.lightburnsoftware.com/t/rotary-connection/15452/1 "2020-05-02T11:56:40Z")

</div>

Hi I bought a generic 20w fibre laser from China , no problems getting it set up and running EZcad2, wanted to have a rotary device fitted , has a 5 pin aviation plug , had a look at the wiring and I think the plug is wired to run a unipolar stepper . Does anyone know of a company that would make a rotary that would work with this?, the supplier of the machine is as much use as a choc teapot ?. Thanks in advance. If Lightburn ever becomes available for fibre I’ll bite your hand off for it. Gerry

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [June 1, 2020, 11:56am UTC](https://forum.lightburnsoftware.com/t/rotary-connection/15452/2 "2020-06-01T11:56:44Z")

</div>

Closed on June 1, 2020, 11:56am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.