# Rotary Setup Missing

**URL:** <https://forum.lightburnsoftware.com/t/rotary-setup-missing/24586>\
**Category:** LightBurn Software Questions\
**Created:** [October 26, 2020, 3:56pm UTC](https://forum.lightburnsoftware.com/t/rotary-setup-missing/24586 "2020-10-26T15:56:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![johnsonj26](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/77aa72/32.png) [@johnsonj26](https://forum.lightburnsoftware.com/u/johnsonj26)\
**Post date:** [October 26, 2020, 3:56pm UTC](https://forum.lightburnsoftware.com/t/rotary-setup-missing/24586/1 "2020-10-26T15:56:53Z")

</div>

Hello, I am trying to setup a rotary tool and I can’t find the “Rotary Setup”. From what I gather, it is supposed to be under Tools and it is not there. The LightBurn version I’m running is v0.9.16 and my controller is an AWC608.

Thanks.

---

<div class="post-metadata">

**Author:** ![adammhaile](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/adammhaile/32/33797_2.png) [@adammhaile](https://forum.lightburnsoftware.com/u/adammhaile)\
**Post date:** [October 26, 2020, 4:04pm UTC](https://forum.lightburnsoftware.com/t/rotary-setup-missing/24586/2 "2020-10-26T16:04:34Z")

</div>

> [@johnsonj26](#):
>
> AWC608

We do not support direct rotary control for Trocen controllers:

> [@Rotary for Trocen?](https://forum.lightburnsoftware.com/t/rotary-for-trocen/5733/2):
>
> It’s not actually possible for the software to access the rotary settings in the Trocen controller. They don’t provide a way to do it, which is why LaserCad doesn’t do it either, so unfortunately my hands are tied. You have to change the rotary settings through the controller panel interface. I’ve requested this from them, and they’ve been unwilling to change it. If they provide a way to do it in the future, LightBurn will add it.

---

<div class="post-metadata">

**Author:** ![johnsonj26](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/77aa72/32.png) [@johnsonj26](https://forum.lightburnsoftware.com/u/johnsonj26)\
**Post date:** [October 26, 2020, 4:42pm UTC](https://forum.lightburnsoftware.com/t/rotary-setup-missing/24586/3 "2020-10-26T16:42:06Z")

</div>

Thanks for the quick response.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [November 25, 2020, 4:42pm UTC](https://forum.lightburnsoftware.com/t/rotary-setup-missing/24586/4 "2020-11-25T16:42:09Z")

</div>

Closed on November 25, 2020, 4:42pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.