# Rotary Setup Missing

**URL:** <https://forum.lightburnsoftware.com/t/rotary-setup-missing/24586>\
**Category:** LightBurn Software Questions\
**Created:** [October 26, 2020, 3:56pm UTC](https://forum.lightburnsoftware.com/t/rotary-setup-missing/24586 "2020-10-26T15:56:53Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![adammhaile](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/adammhaile/32/33797_2.png) [@adammhaile](https://forum.lightburnsoftware.com/u/adammhaile)\
**Post date:** [October 26, 2020, 4:04pm UTC](https://forum.lightburnsoftware.com/t/rotary-setup-missing/24586/2 "2020-10-26T16:04:34Z")

</div>

> [@johnsonj26](#):
>
> AWC608

We do not support direct rotary control for Trocen controllers:

> [@Rotary for Trocen?](https://forum.lightburnsoftware.com/t/rotary-for-trocen/5733/2):
>
> It’s not actually possible for the software to access the rotary settings in the Trocen controller. They don’t provide a way to do it, which is why LaserCad doesn’t do it either, so unfortunately my hands are tied. You have to change the rotary settings through the controller panel interface. I’ve requested this from them, and they’ve been unwilling to change it. If they provide a way to do it in the future, LightBurn will add it.

---

_[View the full topic](https://forum.lightburnsoftware.com/t/rotary-setup-missing/24586)._